772959
1
Zoom out
Zoom in
Previous page
1/2
Next page
ISOFIT locking arms
Safety button
Belt guide (bright red)
Belt holder (dark red)
ISOFIX insertion aids
ISOFIX fastening points (automobile)
Release knob
01
02
03
04
05
06
07
Seat cushion
XP-PAD
SecureGuard
ISOFIT adjustment button
Backrest
08
09
10
Adjusting handle of the headrest
11
Storage compartment
12
13
14
Removing the seat cover
1. Moving the headrest of the vehicle seat into the top
position.
2. Unhook the cover hook 18 on the rear of the backrest.
3. Remove the top part of the cover and fold it forwards to
the seat surface.
4. Unhook the cover hook 18 on the front of the backrest.
5. Pull the cover o of the seat surface.
Removing the headrest cover
6.
Unhook the cover loop
19
on the rear of the backrest.
7. Unhook the cover hook 18 on the front of the backrest.
8.
Pull o the cover of the headrest
21
.
ŹThe cover can now be washed.
Please observe the
instructions on the washing label of the cover:
Re-fitting the cover
Proceed in reverse order to put on the cover.
5. CARE AND MAINTENANCE
2. INTRODUCTION
Thank you for choosing
KIDFIX Z-LINE
to keep your child safe through a new
stage of their life.
In order to protect your child correctly, the
KIDFIX Z-LINE
must always be
used and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact us:
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
16
15
Belt guide colours
For better dierentiation, the two vehicle seat
belts are highlighted in dierent colours. The
diagonal seat belt 16 in dark red and the lap belt
15 in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating instruc-
tions of your vehicle. The seat can be used in vehicles with ISOFIX anchoring systems (see type
list) and in vehicles with a
3-point belt.
Please find the information on the seats approved for child safety seats of the weight classes 15 to
36 kg in the operating instructions of your vehicle
.
The KIDFIX Z-LINE is approved for two dierent methods of installation:
Symbol Installation type Approval type Section
with the ISOFIT locking arms on the
ISOFIX fastening points in the vehicle.
Observe the vehicle type list.
semi-
universal
a)
9A
with the vehicle's 3-point seatbelt universal 9B
a) This means that the child safety seat may only be used in vehicles that are listed in the
vehicle type list enclosed. This type list is consistently kept up to date. The latest version can
be obtained from us or from www.britax-roemer.com
You can use your child safety seat as follows:
In the direction of travel Yes
Against the direction of travel No 1)
with 2-point belt No
with 3-point belt2) Yes
with ISOFIX fastening points
(between seat surface and
backrest)
Yes
on front passenger seat Yes 3)
on outer rear seat Yes
on centre rear seat (with
3-point belt) Yes 4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the vehicle
seat is also approved for use by adults. The seat may not be in the area of eect of an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
15-36 kg
3. CERTIFCATION
BRITAX RÖMER
Vehicle child safety
seat
Testing and certification
In accordance with ECE* R 44/04
Group Body weight
KIDFIX Z-LINE
II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certified according to the
requirements of the European Standard for Child Safety Equipment (ECE R
44/04). The seal of approval E (in a circle) and the approval number are located
on the orange approval label (sticker on the child safety seat).
DANGER! This approval will be invalidated if you make any modifications to
the child safety seat. Only the manufacturer is permitted to make
modifications to the child safety seat. The child seat is approved
for use both with and without XP-PAD / SecureGuard.
WARNING! Use the
KIDFIX Z-LINE
exclusively for securing your child in
your vehicle. It is in no way suitable as a seat or toy in the home.
DANGER! Never secure your child or the child safety seat with a 2-point
belt. If you secure your child in the child seat with only a 2-point
belt, then in the event of an accident this may cause serious
injuries to your child, possibly resulting in death.
PAGE I
6. DISASSEMBLY AND DISPOSAL
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulfils
important functions to ensure the smooth operation of the system. Replacement
seat covers are available from your dealer.
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions on
the washing label of the cover.
• The plastic parts and the XP-PAD can be cleaned with a soap sud. Do not use
any caustic cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover.
1. PRODUCT OVERVIEW
1. Operate the release key of your vehicle seat buckle
2. Open the XP-PAD 10 on the Velcro fastener and
remove the diagonal belt 16 .
3. Open the dark red belt holder 03 by pressing
backwards the key on the belt holder 03 and
unthreading the diagonal belt 16.
Only for installation type A (ISOFIT):
4. To release the ISOFIT fastening, release the green
safety button 07 and the red release button 06 first
on the one and the on the other side opposite on
another.
ŹThe child safety seat can now be removed.
DANGER! The child safety seat must always be
secured when it is in the vehicle, even if
no child is being transported.
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the
corresponding container
Metal parts Container for metals
Belt straps Container for polyester
buckle and tongue Residual waste
REMOVAL:
UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
TIP! The XP-PAD can remained applied for easier use on the diagonal belt
of your vehicle, the diagonal belt must be retensioned before every journey;
see: Section10 step 12 [page II].
KIDFIX Z-LINE
User instructions GB
15 kg - 36 kg
(~4 Y - 12 Y)
www.britax-roemer.com
2000033624 - 09/19
www.britax-roemer.com
07
01 02
03
09
11
13
12
06
04
05
10
14
08
19
19
18
21
03
16 10
0706
18
BRITAX RÖMER
Kindersicherheit GmbH
Kindersicherheit GmbH
Theodor-Heuss-Straße 9
89340 Leipheim
Germany
+49 (0) 8221 3670 199
BRITAX Excelsior Limited
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
+44 (0) 1264 386034
BRITAX Nordiska Barn AB
Jörgen Kocksgatan 4
SE-211 20 Malmö
Sweden
www.britax-roemer.com | hello@britax-roemer.com
BRITAX RÖMER Child Safety EMEA
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Britax-Romer KIDFIX Z-LINE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Britax-Romer KIDFIX Z-LINE in the language / languages: English as an attachment in your email.

The manual is 0.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Britax-Romer KIDFIX Z-LINE

Britax-Romer KIDFIX Z-LINE User Manual - German - 2 pages

Britax-Romer KIDFIX Z-LINE User Manual - Dutch - 2 pages

Britax-Romer KIDFIX Z-LINE User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info