767965
1
Zoom out
Zoom in
Previous page
1/2
Next page
01 02
03
10
15
16
08
15 to 36 kg
(~4 to 12 years of age)
User instructions
06
07
SICT Fastening points
ISOFIT Locking arms
SICT Release button
SICT (only KIDFIX SL SICT)
ISOFIX insertion aids
ISOFIX fastening points (vehicle)
Belt guide (bright red)
01
02
03
04
05
06
07
Headrest
Seat cushion
Belt holder
ISOFIT Locking button
Compartment for user manual
08
09
10
ISOFIT Adjustment button
11
Adjustment belt
12
13
14
05
11
09
04
12
13
14
Backrest
Headrest adjustment handle
15
16
www.britax.eu
2000010049 15/04
GB
KIDFIX SL
KIDFIX SL SICT
2. INTRODUCTION
Thank you for choosing
KIDFIX SL / KIDFIX SL SICT
to keep your child safe
through a new stage of their life.
In order to protect your child correctly, the
KIDFIX SL / KIDFIX SL SICT
must always be used and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact
us:
BRITAX RÖMER
Kindersicherheit GmbH
Blaubeurer Straße 71
D-89077 Ulm
Germany
T.: +49 (0) 731 9345-199/-299
F.: +49 (0) 731 9345-210
E.: service.de@britax.com
www.britax.eu
BRITAX EXCELSIOR
LIMITED
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
E.:
service.uk@britax.com
www.britax.eu
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
18
17
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours. The di-
agonal seat belt 18 in dark red and the lap belt
17 in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle. The seat can be used in vehicles with ISOFIX anchoring systems
(see type list) and in vehicles with a 3-point belt.
3lease ¿nd the information on the seats approved for child safety seats of the weight classes 15
to 36 kg in the operating instructions of your vehicle.
The KIDFIX SL / KIDFIX SL SICT is approved for two different methods of installation:
Symbol Installation type Approval type Section
with the ISOFIT locking arms into the
ISOFIX fastening points in the vehi-
cle. Check the list of vehicle types.
semi-univer-
sal
a)
9A
with the vehicle's 3-point seatbelt universal 9B
a)
This means that the child safety seat may only be used in vehicles that are listed in the
vehicle type list enclosed. This type list is consistently kept up to date. The latest version
can be obtained from us or from www.britax.eu / www.roemer.eu.
You can use your child safety seat as follows:
In the direction of travel Yes
Against the direction of travel no 1)
with 2-point belt no
with 3-point belt2) Yes
with ISOFIX fastening points
(between seat surface and
backrest)
Yes
on front passenger seat Yes 3)
on outer rear seat Yes
on centre rear seat (with
3-point belt) Yes 4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the
vehicle seat is also approved for use by adults. The seat may not be in the area of effect of
an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
15–36 kg
3. Certification
BRITAX RÖMER
Child safety seat
Testing and certi¿cation
In accordance with ECE* R 44/04
Group Body weight
KIDFIX SL
KIDFIX SL SICT
II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certi¿ed according
to the requirements of the European Standard for Child Safety Equipment
(ECE R 44/04). The seal of approval E (in a circle) and the approval number
are located on the orange approval label (sticker on the child safety seat).
DANGER! This approval will be invalidated if you make any modi¿ca-
tions to the child safety seat. Only the manufacturer is permit-
ted to make modi¿cations to the child safety seat.
WARNING! Use the
KIDFIX SL / KIDFIX SL SICT
exclusively for secur-
ing your child in your vehicle. It is in no way suitable as a
seat or toy in the home.
DANGER! Never secure your child or the child safety seat with a 2-point
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.
PAGE I
6. DISASSEMBLY AND DISPOSAL
1. PRODUCT OVERVIEW
1. Operate the release button of your vehicle seat
buckle.
2. Pull out the diagonal belt from the dark red belt hold-
er 09 on the headrest 14
Only for installation type A (ISOFIT):
3. Press the red ISOFIT locking button to release the
ISOFIT fastening 08 and pull out the ISOFIT locking
arm 07 . Repeat the procedure with the other ISOFIT
locking arm 07 .
4. Pull on the adjustment belt 12 until both ISOFIT
locking arms 07 are in the storage position.
ŹThe child safety seat can now be removed.
DANGER! the child safety seat must always be
secured when it is in the vehicle, even if no child is
being transported.
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the corre-
sponding container
Metal parts Container for metals
Belt straps Container for polyester
buckle and tongue Residual waste
06
12
REMOVAL:
UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
08
06
08
06
Removing the seat cover
1. Moving the headrest of the vehicle seat into the top
position.
2. Unhook the cover hooks 20 on the rear of the back-
rest 16 .
3.
Remove the upper part of the cover.
4. Unhook the cover loops 21 at the bottom on the rear
of the backrest 16
5. Pull off the cover from the seat cushion 10 .
Removing the headrest cover
6.
Unhook the cover loops
21
on the back of the head-
rest
14
.
7. Unhook the cover hooks 20 on the front of the back-
rest 16
8.
Pull off the cover of the headrest
14
.
ŹThe cover can now be washed.
Please observe the
instructions on the washing label of the cover:
Re-¿tting the cover
Proceed in reverse order to put on the cover.
5. CARE AND MAINTENANCE
20
14
20
21
21
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and ful¿ls
important functions to ensure the smooth operation of the system. Replacement
seat covers are available from your dealer or from an ADAC of¿ce.
The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions
on the washing label of the cover.
The plastic parts can be cleaned using soapy water. Do not use any caustic
cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover.
To release the SICT, 03 press the SICT release button 04
and remove the SICT 03 .
03
04
150415_KIDFIX_SL_KIDFIX_SL_SICT_GB.indd 1 15.04.2015 08:23:30
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Britax-Romer KIDFIX SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Britax-Romer KIDFIX SL in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Britax-Romer KIDFIX SL

Britax-Romer KIDFIX SL User Manual - German - 2 pages

Britax-Romer KIDFIX SL User Manual - Dutch - 2 pages

Britax-Romer KIDFIX SL User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info