767961
2
Zoom out
Zoom in
Previous page
1/2
Next page
6. Place the XP-PAD 11 in the side of the child safety
seat closer to the vehicle door.
8. Place the child safety seat in driving direction on
a vehicle seat approved for use.Ensure that the
backrest 14 is flush with the backrest of the vehicle
seat .
9. Position the two ISOFIT locking arms 06 directly in
front of the two insertion aids 02 .
10. Push both ISOFIT locking arms 06 into the insert
guides 02 until the ISOFIT locking arms 06 engage
on both sides with a clicking sound.
DANGER! The green safety button 08 must be
visible on both sides so that the child
safety seat is correctly fastened.
11. Hold the ISOFIT settings button 09 down and push
the child safety seat as far back as possible.
1. Carry out the steps in Section 8 "ADJUSTING THE
HEADREST".
2. Place the XP-PAD 11 on the side of the child safety
seat closer to the vehicle door.
3. Guide the elastic holding strap of the XP-PAD 11
into the dark red belt holder 03 of the headrest 22
until it lies completely in the belt holder 03 and is
not twisted.
4. Place the child seat on the vehicle seat. Ensure that
the backrest 14 is flush with the backrest of the
vehicle seat.
Tip! If the head restraint of the vehicle seat prevents
the child seat from being fastened in place properly, it
should be removed (see vehicle operating manual). After
removing the head restraint, secure it in a suitable place
in the vehicle so that it cannot be thrown around.
5. Carry out the steps in Section 10 "SECURING
YOUR CHILD".
12. Shake the child safety seat to ensure that it is
securely fastened and check again the fastening
buttons 08 to ensure that both are fully green.
13. Carry out the steps in Section 10 "SECURING
YOUR CHILD".
For the safety of your child, before every journey in the car check that...
Źthe child safety seat is slotted in on both sides with the ISOFIT locking arms
06 in the ISOFIT fastening points 01 and both safety buttons 08 are fully
green;
Źthe child safety seat is securely fastened;
Źthe lap belt 16 runs in the bright red belt guides on both sides of the seat
cushion 05 ,
Źthe
lap belt
16
runs through the bright red
SecureGuard 10 .
Źthe diagonal seat belt section 17 on the side of the vehicle seatbelt buckle
18 also runs through the light red belt guide 05 of the seat cushion,
Źthe diagonal seat belt section 17 runs through the dark red belt holder 03 of
the headrest,
ŹXP-PAD 11 and XP-SICT 04 are correctly installed and used,
Źthe diagonal seat belt section 17 runs diagonally backward,
Źthe straps are tight and not twisted,
Źthe seatbelt buckle 18 must not be positioned on the red belt guide 05 in
the seat cushion.
DANGER!
If your child try to use to open the vehicle belt buckle 18 or
introduce the diagonal belt section 17 into the bright red SecureGuard 10 ,
stop as soon as possible. Check whether the child safety seat is correctly
fastened and ensure that your child is correctly secured. Explain to your
child the dangers associated with his actions.
7. SAFETY NOTES
Please take the time to read these instructions carefully and keep them
to hand in the intended storage compartment 13 on the child safety seat
at all times! The instructions must be with the child safety seat if the latter
is passed on to a third party.
DANGER! For the protection of your child:
In the event of an accident with a collision speed of more than 10 km/h, the
child safety seat may be damaged without the damage becoming immediately
visible. In this case the child safety seat must be replaced. Please dispose of
it properly.
As a rule, have your child safety seat checked if it was damaged (e.g if it falls
on the ground).
Regularly check all important parts for damage. Ensure that all mechanical
parts, in particular, are fully functional.
• Never lubricate or oil parts of the child seat.
Never leave your child unattended in the child seat in the vehicle.
Only allow your child to enter and exit the vehicle on the pavement side.
Protect the child safety seat from intensive direct sunlight when it is not in use.
The child safety seat can get very hot in direct sunshine. Child skin is sensitive
and could thereby be harmed.
The more snugly the belt fits over your child's body, the better they will be
protected. Therefore avoid putting thick clothes on your child under the belt.
Take regular breaks on long journeys in order to give your child the
opportunity to play around.
Use on the rear seat: Move the front seat forward far enough that you child's
feet cannot hit the backrest of the front seat (to prevent risk of injury).
DANGER! For the protection of all vehicle occupants:
In the case of an emergency stop or an accident, unsecured persons or objects
may cause injury to other vehicle occupants. Please always check that...
the backrests of the vehicle seats are locked (i.e. that any foldable rear seat
bench latch is engaged).
all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf) are
secured.
• all persons in the vehicle have their seatbelts fastened.
the child safety seat is always secured when it is in the vehicle, even if no child
is being transported.
WARNING! For your protection when handling the child seat:
• Never use the child safety seat free-standing, not even for test sitting.
The backrest 14 may tip backward. Always place the child seat on the vehicle
seat before having your child sit down in it.
When swivelling up the backrest 14 , nothing must come between the
backrest 14 and the seat cushion15 . You or your child could pinch your
fingers, injuring them.
To avoid damage, ensure that the child safety seat is not jammed in between
hard objects (car door, seat rails, etc.).
Keep the child safety seat in a safe place when it is not in use. Do not place any
heavy objects on the seat and do not store it directly next to sources of heat or
in direct sunlight.
CAUTION! To protect your vehicle:
Certain car seat covers made from more sensitive materials (e.g. velour, leather,
etc.) may sustain signs of wear and tear when using child safety seats. For
optimum protection of your car seat covers, we recommend using the BRITAX
RÖMER car seat protector from our range of accessories.
PAGE II
For the safety of your child, before every journey in the car check that...
Źthe child safety seat is securely fastened;
Źthe lap belt
16
runs in the bright red belt guides on both sides of the seat
cushion
05
,
Źthe
lap belt
16
runs through the bright red
SecureGuard 10 .
Źthe diagonal seat belt section 17 on the side of the vehicle seatbelt buckle
18 also runs through the light red belt guide 05 of the seat cushion,
Źthe diagonal seat belt section 17 runs through the dark red belt holder 03
of the headrest,
Źthe diagonal seat belt section 17 runs diagonally backward,
Źthe straps are tight and not twisted,
ŹXP-PAD 11 and XP-SICT 04 are correctly installed and used,
Źthe seatbelt buckle 18 must not be positioned on the red belt guide 05 in
the seat cushion.
DANGER! If your child try to use to open the vehicle belt buckle 18 or
introduce the diagonal belt section 17 into the bright red SecureGuard 10 ,
stop as soon as possible. Check whether the child safety seat is correctly
fastened and ensure that your child is correctly secured. Explain to your
child the dangers associated with his actions.
A correctly set headrest 22 ensures that the diagonal seat belt section 17 is
optimally positioned, and gives your child optimum protection.
The headrest 22 must be adjusted so that there is a space two fingers wide
between the headrest 22 and your child's shoulders.
To adjust the height of the headrest to fit your child:
1. Reach into the adjustment handle 12 on the back
of the headrest 22 and pull it towards you.
This unlocks the headrest.
2. You can now move the unlocked headrest 22 to
the desired height. As soon as you release the
adjustment handle 12 , the headrest 22 will lock
into place.
3. Place the child safety seat on the vehicle seat.
4. Have your child sit down in the child safety seat and
check the height. Repeat the procedure until the
headrest 22 has the correct height.
01
02
1. If your vehicle is not fitted with ISOFIX insertion aids by standard, clamp
the two insertion aids 02 , with are included in the scope of delivery of the
seat*, with the section pointing upwards to the two ISOFIX fastening points
01 of your vehicle.
TIP!
The ISOFIX fastening points are located between the surface and the backrest
of the vehicle seat.
* The insertion aids facilitate the installation of the child safety seat with the
use of the SOFIX fastening points and prevent damage to the car seat covers.
As long as they are not used, remove them and keep them in a safe place. For
vehicles with foldable a backrest, the insertion aids need to be removed before
folding the backrest. Any problems occurring usually come from soiling or ex-
ternal objects on the insertion aids and on the hook. Remove soiling or external
objects to rectify such problems.
2. Moving the headrest of the vehicle seat into the top position.
3. Carry out the steps in Section 8 "ADJUSTING THE HEADREST".
8. ADJUSTING THE HEADREST
9. INSTALLATION
With ISOFIT + 3-point belt
A
The
KIDFIX III S
is installed permanently in the vehicle with the ISOFIT locking
arms.
Your child is then buckled into the child seat with the vehicle's 3-point seatbelt.
4. Hold the ISOFIT settings button 09 down and push
the ISOFIT locking arms 06 out in full .
2. Let your child sit in the child safety seat and place
the XP-PAD 11 over the chest area of your child.
If you find that the retraction force of the 3-point seat
belt is not enough to ensure that the seat belt is tight
(against the child), the child seat can be used without
XP-PAD 11 ; see Chapter 3 APPROVAL [PAGE I].
3. Pull out the vehicle belt and guide it in front of your
child to the vehicle seat buckle 18 .
DANGER! Ensure the vehicle belt is not twisted, as
otherwise the full protective eect of the
retaining system is not ensured.
4. Engage the buckle tongue in the vehicle seat buckle
18 with a CLICK!
5. Place the diagonal seat belt section 17 and lap
belt section 16 on the side of the vehicle seatbelt
buckle 18 into the light red belt guide 05 of the seat
cushion.
DANGER! The vehicle seatbelt buckle must not
be positioned between the light red belt
guide and the armrest.18 05
6. Also place the lap belt section 16 on the other side
of the seat cushion in the light red belt guide 05 .
DANGER! The lap belt section 16 must lie as low
as possible over your child's hips on both
sides.
8. Guide the diagonal seat belt section
17 into the dark
red belt holder 03 of the headrest 22 until it lies
completely in the belt holder 03 and is not twisted.
Tip! If the backrest
14
conceals the belt holder
03
,
you can adjust the headrest
22
upwards. The diagonal
seat belt section
17
can now be easily inserted. Now
return the headrest
22
to the proper height.
9. Ensure that the diagonal belt 17 runs over the collar-
bone of your child and is not on the neck and that
the key on the belt holder is 03 fully closed.
Tip! You can still adjust the height of the headrest 22
again here in the vehicle.
10. Open the Velcro fastener on the XP-PAD 11 and fold
the top part of the XP-PAD 11 to the side.
11. Insert the diagonal belt 17 in the die nubby surface
of the XP-PAD 11 .
12. Close the XP-PAD 11 again by folding the folded
part back and closing the Velcro fastener.
DANGER! The diagonal seat belt section 17 must
run diagonally backward. You can adjust
the course of the belt with your vehicle's
adjustable belt deflector.
DANGER! The diagonal belt 17 must never be
directed forwards to the belt deflector
on the vehicle. In this case, use the child
safety seat on the back seat only.
13. Tighten the vehicle seat belt by pulling on the diagonal
seat belt section
17
.
14. Observe the further steps of the relevant installation
type.
1. Unscrew the XP-SICT 04 anti-clockwise (on the side
closer to the vehicle door) until it has a distance of
5 mm to the vehicle door or has been unscrewed to
the maximum.
5. Push the green safety button
08
and the red release
button
07
on both sides of the seat towards each
other. This ensures that both hooks on the ISOFIT
locking arms
06
are open and ready to use.
10. SECURING YOUR CHILD
UNFASTENING YOUR CHILD AND REMOVAL:
To unfasten your child or to remove the child safety seat, observe the steps in
Section 6 "REMOVAL AND DISPOSAL" [PAGE I]
The
KIDFIX III S
is not installed permanently in the vehicle. It is simply secured
together with your child using the vehicle's 3-point seatbelt.
With 3-point belt
B
7. Guide the elastic holding strap of the XP-PAD 11
into the dark red belt holder 03 of the headrest 22
until it lies completely in the belt holder 03 and is not
twisted.
UNFASTENING YOUR CHILD AND REMOVAL:
To unfasten your child or to remove the child safety seat, observe the steps
in Section 6 "REMOVAL AND DISPOSAL" [PAGE I]
Adjusting the backrest:
The backrest 14 is connected to the seat cushion 15 by
an articulated axis. The backrest 14 of the child seat can
be adjusted to any inclination of the vehicle seat.
Please know that optimal protection is guaranteed only if
the vehicle seat is in an upright position.
7. Guide the lap belt section 16 into the bright red
SecureGuard 10 .
DANGER!
Do not guide the diagonal the section
17
into the bright red SecureGuard
10
.
2212
0807
22
11
04
18
17
16 05
18
16
05
17
17
11
17
17
11
03
11
03
03
17
03
22
09
06
0602
08
09
11
14
11
14
15
14
17 10 16
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Britax-Romer KIDFIX III S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Britax-Romer KIDFIX III S in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Britax-Romer KIDFIX III S

Britax-Romer KIDFIX III S User Manual - German - 2 pages

Britax-Romer KIDFIX III S User Manual - Dutch - 2 pages

Britax-Romer KIDFIX III S User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info