767936
1
Zoom out
Zoom in
Previous page
1/2
Next page
USE IN THE VEHICLE
4.
09
10
Shoulder pad
Harness buckle
Handle
Belt guides
Buttons
Headrest
Shoulder straps
01
02
03
04
06
07
08 Belt holder
Belt slots
Belt end
09
11
12
Adapter
13
Sunshade hook
14
Removing the seat cover
1. Remove the sunshade (see chapter 8.5).
2. Open the harness buckle 08 (press the red release
button).
3.
Release the fasteners on the shoulder pads
06
.
4. Pull the part of the headrest cover under the shoulder
straps 07 upwards .
5.
Pull the cover upwards o the headrest
01
.
6. Unhook the plastic strips from underneath the edge of
the infant carrier on all sides.
7. Pull the belt end 09 out of the cover.
8. Remove the cover.
The cover can now be washed.
Please observe the instruc-
tions on the washing label of the cover.
Remove the back of the new born insert before washing ,
this must not be washed:
08
CARE AND MAINTENANCE
5.
Buckle tongues
05
Instruction compartment
10
14
13
06
04
0501
02
03
07
08
11
12
01
07
06
09
16
17
12
03
18
17
26
1. Rotate the SICT 26 all the way back in a clockwise
direction.
2. Unhook the diagonal strap 16 from the light blue belt
holder 12 .
3. Open the vehicle seat buckle 18 and take the lap belt
section 17 out of the dark blue belt guides 03 .
The infant carrier can now be removed.
DANGER! The infant carrier must always be se-
cured when it is in the vehicle, even if no child is being
transported.
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the
corresponding container
Metal parts Container for metals
Belt straps Container for polyester
Buckle and tongue Residual waste
REMOVAL:
Removing and cleaning the harness buckle
1. Tip the infant carrier backwards.
2. Push the metal plate 30 , with which the harness buckle
is fixed to the seat shell, on its side upwards through the
belt slot 31 .
3. Soak the buckle 08 in warm water with dishwashing
liquid for at least an hour. Rinse and dry thoroughly.
Fitting the harness buckle:
1. Push the metal plate 30 on its side downwards through
the belt slot 31 in the cover and through the seat shell.
Pay attention to the direction.
2. Check for correct fitting by pulling firmly on the harness
buckle 08 .
Re-fitting the cover
Proceed in reverse order to re-fit the cover.
08
30
31
We are pleased that our
BABY-SAFE i-SIZE
may accompany your child safely
through the first months of his or her life.
In order to protect your child correctly, the
BABY-SAFE i-SIZE
must
always be used and installed as described in these user instructions.
Please read the user instructions carefully before you use the
BA-
BY-SAFE i-SIZE
for the first time, and keep these instructions in the
space provided on the infant carrier.
If you have any further questions regarding the use of the carrier, please feel
free to contact us:
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button... 16
17
Belt guide colours
For better dierentiation, the two vehicle seat
belts are highlighted in dierent colours. The
diagonal strap 16 in light blue and the lap belt
17 in dark blue. The colours of the belt guides
on the child safety seat follow the same colour
scheme.
Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle.
Please refer to the operating instructions for your vehicle for information about vehicle
seats which are certified for the use of children's restraining systems according to ECE R16.
Usage options for the
BABY-SAFE i-SIZE:
BRITAX RÖMER
child safety seat
Vehicle seating position
i-Size Not i-Size
BABY-SAFE i-SIZE
You can also use the BABY-SAFE i-SIZE / BABY-SAFE i-SIZE² in combination with the
BABY-SAFE i-SIZE BASE/FLEX BASE (available as an accessory) as an i-Size approved
product. The bases make it easier to fit the seat in and remove it from your vehicle safely. The
BABY-SAFE i-SIZE FLEX BASE also makes it possible to adjust the angle of the infant carrier.
You can use your child safety seat as follows:
In the direction of travel No
Against the direction of travel Yes
With 2-point belt No
With 3-point belt1) Yes
On front passenger seat Yes 2)
On outer rear seat Yes
On centre rear seat
(with3-point belt) Yes 3)
1) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
2) The front airbag must be deactivated. Observe the instructions in the vehicle owner's manual.
3) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
The
BABY-SAFE i-SIZE
is exclusively intended to secure your baby in your
vehicle.
BRITAX RÖMER
child safety seat
Tested and certified
according to ECE* R 129/00
Body size Body weight
BABY-SAFE i-SIZE
40 - 83 cm ≤ 13 kg
*ECE = European Standard for Child Safety Equipment
The infant carrier has been designed, tested and certified according to the
requirements of the European Standard for Child Safety Equipment (ECE
R129/00). The seal of approval "E" (in a circle) and the approval number are
located on the orange approval label (sticker on the child safety seat).
DANGER! The infant carrier must not be used with any base stations
other than those listed in chapter "4. USE IN THE VEHICLE".
DANGER! This certification will be invalidated if you make any modi-
fications to the child safety seat. Only the manufacturer is
permitted to make modifications to the child safety seat.
Unauthorised technical changes can cause the protective
function of the seat to be reduced or completely eliminated.
Do not make any technical changes to the infant carrier.
WARNING! Use the
BABY-SAFE i-SIZE
exclusively for securing your
child in your vehicle. It must never be used as a seat or toy
inthe home.
DANGER! Never secure your child or the child safety seat with a 2-point
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.
PAGE I
Please ensure that you only use the original BRITAX RÖMER replacement seat cov-
ers, as the seat cover is an integral part of the child safety seat and fulfils important
functions to ensure the smooth operation of the system. Replacement seat covers
are available from your dealer.
• The plastic parts can be cleaned using soapy water. Do not use harsh cleaning
agents (such as solvents).
DANGER! The infant carrier must not be used without the seat cover.
User instructions
www.britax.com
2000029669 11/17
GB
≤ 13 kg
40 cm - 83 cm
DISASSEMBLY/DISPOSAL
6.
INTRODUCTION
2. CERTIFCATION
3.
PRODUCT OVERVIEW
1.
Britax Childcare
Britax Römer
Kindersicherheit GmbH
Theodor-Heuss-Straße 9
D-89340 Leipheim
Germany
T.: +49 (0) 8221 3670-199/-299
F.: +49 (0) 8221 3670-210
E.: service.de@britax.com
www.britax.com
Britax Childcare
Britax Exelsior Limited
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
E.: service.uk@britax.com
www.britax.com
40 - 83 cm
≤ 13 kg
BABY-SAFE i-SIZE
BABY-SAFE² i-SIZE
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Britax-Romer BABY-SAFE i-SIZE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Britax-Romer BABY-SAFE i-SIZE in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Britax-Romer BABY-SAFE i-SIZE

Britax-Romer BABY-SAFE i-SIZE User Manual - German - 2 pages

Britax-Romer BABY-SAFE i-SIZE User Manual - Dutch - 2 pages

Britax-Romer BABY-SAFE i-SIZE User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info