753042
3
Zoom out
Zoom in
Previous page
1/16
Next page
Art.-nr.: 611885-G
3
Modbus Interface
Aansluiten %rinN &onnect op 5enovent ([cellent 6N\
'raadNleur
C1 bruin
C2 geel
C3 groen
C4 wit
Uitleeswaarden
Functie
code
0x03
Modbus
adres Omschrijving correctie
factor
sig-
ned :aarden opmerNingen
4002 Toestel type 1 nee
4004 Toestel uitvoering (basic/ Plus) 1 nee
4009 Actuele temperatuur van buitensensor [°C] 0.1 ja
4010 Actuele temperatuur uit de woning [°C] 0.1 ja
4011 Actuele kanaaldruk toevoer [Pa] 1 nee Opm.: Alleen bij constant volumen ventilator4012 Actuele kanaaldruk afvoer [Pa] 1 nee
4013 Ingesteld luchtdebiet [m
3
/h] 1 nee
4016 Onbalans toelaatbaar 1 nee 0 = Onbalans niet toelaatbaar
1 = Onbalans toelaatbaar
4022 Ingestelde onbalans [m
3
/h] 1 ja
4028 Actueel luchthoeveelheid toevoerventilator [m
3
/h] 1 nee Opm.: Alleen bij constant volumen ventilator
4029 Actueel luchthoeveelheid afvoerventilator [m
3
/h] 1 nee
4030 Positie bypass klep 1 nee 0 = Initialiseren / 1 = Onderweg naar open /
2 = Onderweg naar sluiten/ 3 = Open /
4 = Gesloten / 255 = Positie onbekend
4031 Werking bypassklep 1 nee 0 = Automatisch werken/ 1 = Bypassklep
gesloten/ 2 = Bypassklep open
4037 Status voorverwarmer 1 nee 0= initialiseren/ 1= niet actief/ 2= actief/
3= testmode/ 255= status onbekend
4038 Vermogen voorverwarmer [%] 1 nee
4039 Actuele foutcode 1 nee WTW-toestel foutcode (0 = geen fout)
4040 Filter melding 1 nee 0 = Filter schoon / 1 = Filter vuil
4041 Aardwarmtewisselaar mode 1 nee 0 = Uit / 1 = Aan
4047 Aardwarmtewisselaar min. temperatuur [°C] 0.1 ja
4053 Aardwarmtewisselaar max. temperatuur [°C] 0.1 ja
4059 Nr. geselecteerde CO
2
sensor (max. 4 stuks) 1 nee Opm.: Alleen een gemonteerde eBus CO
2
sensor zal worden ondersteund.
4060 Waarde geselecteerde CO
2
sensor [PPM] 1 nee
:erNwij]e aansluiten :T:-toestel op gebouw beheers\steem
z Verbind WTW-toestel volgens bovenstaand schema met de Brink Connect en het gebouwbeheersysteem.
z Verwijder de Modbus RS485-afsluitweerstand indien deze niet nodig is! Als meerdere Brink connects in één lijn worden toegepast
mogen er maximaal 2 aansluitweerstanden (RS485) in de lijn aanwezig zijn.
z Sluit netspanning aan op WTW-toestel/ gebouwbeheersysteem.
z Stel eventueel nog waarden in op het WTW-toestel middels display/ (bij Sky toestel een tijdelijk aan te sluiten) bedienmodule of
Brink servicetool.
z Bij het aansluiten van meerdere Brink Connect modules volg de volgende stappen:
- Sluit de eerste Brink Connect aan op het gebouwbeheersysteem.
- Wijzig het Modbus slave adres via Modbusadres 1000 in een uniek adres.
- Herhaal bovenstaande stappen voor elke aan te sluiten Brink Connect.
pw
NL
Aansluitklemmen
Brink Connect
schroefbaar tot 1,5
mm²
1
2
3
4
C1
C2
C3
C4
C1
C2
C3
C4
Modbus-
Systeem
pwr
1
+5V
2
GND
3
SDA
4
SCL
5 A
485
6 B
485
I2C <> Modbus
cdefgh
%rinN
Connect
Fabrieks-
instelling
jumpers
5egelprint in
5enovent ([cellent
of 5enovent 6N\
Meegeleverde
aansluitNabel
Aan kabel
gemonteerde
edge-connector Groene LED
voedingspanning
RS485 afsluitweerstand
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brink Connect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brink Connect in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info