729860

Bresser 7060200 - TemeoTrend FSX Manual

13
Zoom out
Zoom in
Previous page
1/16
Next page
13 / 16
7. Press CH/UP or 12/24/DOWN button to change the value.
8. Press the BARO button to save and exit the setting mode.
NOTE
9. The default relative atmospheric pressure value is 1013 mb/hPa (29.91 inHg), which refers to the
average atmospheric pressure.
10. When you change the relative atmospheric pressure value, the weather indicators will change
along with it.
11. The built-in barometer can notice the environmental absolute atmospheric pressure changes.
Based on the collected data a forecast for the weather conditions in the next 12 hours can be
made. Therefore, the weather indicators will change according to the detected absolute atmo-
spheric pressure after you operate the clock for 1 hour.
12. The relative atmospheric pressure is based on the sea level, but it will change with the absolute at-
mospheric pressure changes after operating the clock for 1 hour.
18 Connecting remote sensors
The measurements of up to 3 remote sensors* of the same type can be displayed on the weather sta-
tion's screen.
1. Remove the battery compartment cover from the remote sensor.
2. Press the CH button repeatedly until the desired channel is shown on the sensor display (CH1,
CH2 or CH3).
3. Re-attach the battery compartment cover.
4. Press the CH button on the base station repeatedly to display the measurements of the different
channels. The selected channel is shown on the display.
*one remote sensor included, more optionally available
19 Temperature display
Press °C/°F button to switch between °C or °F temperature display.
When reaching temperatures of -40°C or below, "LO" will be displayed for the respective area. When
reaching temperatures of 70°C or above, “HI” will be displayed. The temperature is below or above the
measuring range.
After returning into the measurement range, the respective temperature will be displayed again.
20 History record for the past 24 hours
The base station automatically records air pressure readings from the last 24 hours.
If necessary, press the HISTORY button several times to display the history data for the hourly values
(HOUR - up to 24 hours backwards) for the pressure one after the other.
When a history date is displayed, press any key (except HISTORY) to return to the normal display
mode.
NOTICE!In the history bar graph the values for the pressure of the last 24 hours can be read at
any time in compressed form.
21 MAX/MIN Weather data
The main unit saves highest and lowest value records for indoor and outdoor temperature as well as
for humidity for 24 hours:
1. Press the MAX/MIN button repeatedly to display the stored values of the base station and the cur-
rently set remote sensor one after another.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 7060200 - TemeoTrend FSX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 7060200 - TemeoTrend FSX in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 7060200 - TemeoTrend FSX

Bresser 7060200 - TemeoTrend FSX User Manual - German - 16 pages

Bresser 7060200 - TemeoTrend FSX User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info