655617
3
Zoom out
Zoom in
Previous page
1/68
Next page
GB
3
OWNER'S MANUAL • PATH
Put the console to the correct position. Tighten the
screws (C) and washers (D) inside holes at the top of
the upright.
Attach the side caps (B) with screws (F) at the
bottom of the upright, and tighten them well.
POWER CORD AND GROUNDING
INSTRUCTIONS
Plug the socket end of the power cord into the
treadmill at the left front corner. Before connecting
the device to a power source, make sure that local
voltage matches that indicated on the type plate.
The treadmill operates at 110 V or 230 V.
This treadmill must be grounded. If it should
malfunction or breakdown, grounding provides
a path of least resistance for electrical current to
reduce the risk of electrical shock. This product
is equipped with a cord having an equipment-
grounded conductor and a grounding plug.
The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Do not use extension cables when connecting the
equipment to the power source.
ASSEMBLY
As for the assembly of the device, we recommend
two grown-up persons. Do not take the treadmill
out of the box: use the packing material to cover the
floor on the assembly site.
Before assembling the device, insure all parts are
present:
1. Frame
2. Power cord
3. Assembly kit: keep the assembly tools, as you may
need them e.g. for adjusting the equipment
In case of problems contact your Bremshey dealer.
The directions left, right, front and back are defined
as seen from the exercising position. To avoid
injury, you must fold up the deck prior to lifting the
treadmill out of the box.
Locate the hardware bag and parts that are listed in
the chart below.
Part# Description Q´TY
A Main frame and console 1
B Side cap 2
C Screw 6
D Washer 4
E Washer 2
F Screw 6
G Allen key 1
H Screwdriver 1
I Safety Key 1
Lift up the upright, then place the screws (C) and
washers (D, E) inside holes at the bottom of the
upright. Tighten them well.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bremshey Treadline Path at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bremshey Treadline Path in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info