716530

Breadman BK1060S Manual

8
Zoom out
Zoom in
Previous page
1/10
Next page
14 15
DOUGH CYCLE
Tips for Best Results
• If using delay bake timer, make sure yeast is on top of flour, away
from liquids.
Important: Never allow dough to remain in bread maker after cycle is
complete; it may over rise and damage machine.
• Rising times for dough after it is shaped and placed in baking pan
will vary due to recipe, temperature and humidity level of your
kitchen. Optimum temperature for rising is 80°– 85°F. Rising is the
most essential feature in bread making.
• Bread maker allows dough to have first rise or fermentationbefore
dough is removed. Fermentation conditions gluten, (becoming
pliable and elastic with a soft, smooth quality) develops flavor and
leavens product.
• Sometimes a double rising is beneficial especially for whole grain
or 100% whole wheat bread. Let dough rise once in bread maker.
Remove from bread maker, punch down, let rise again, punch down
and let rest 10 minutes. Resting allows gluten to relax and makes
handling easier. Shape as desired and allow to rise until doubled in
volume. If only 1 rise is desired, remove from bread maker, let rest,
shape and rise as above.
• Baker’s Tip: Dough has doubled in volume when an indentation
remains after tip of a finger is pressed lightly and quickly into dough.
If indentation springs back, cover and let rise a few more minutes
and check again.
SPECIAL TIPS FOR MAKING DOUGH
Important: For use only with the Dough Cycle.
• Always allow optimum rising of shaped dough.
• Use pastry brush to apply glaze.
• Bake as directed in recipe.
Apply Just Before Baking:
Egg Yolk Glaze
For shiny golden crust, mix 1 slightly beaten egg or egg yolk with
1 tbsp. water or milk.
Egg White Glaze
For shiny, chewy crust, mix 1 slightly beaten egg white with
1 tbsp. water.
If desired, sprinkle chopped nuts or fruit and/or seeds after glazing.
Lightly Floured
Sprinkle enough flour onto work area so dough can be handled without
sticking.
Shaped Rolls
Important: Once rolls are shaped, cover and let rise until doubled
before baking.
Cloverleaf Rolls
Shape into ½-inch balls. Place 3 balls in each greased muffin tin.
Crisscross Rolls
Shape into balls, setting 2 aside. Combine balls and roll into a ¹⁄
8-inch
thick square. Cut strips ¹⁄
8-inch wide and 2-inches long. Brush top
of roll with beaten egg. Place 1 strip across top of each ball. Repeat
process, placing second strip in opposite direction across top of
each ball.
Traditional Rolls
Shape into balls. For “pull apart” rolls, place dough balls with sides
touching in 8 or 9 inch round or square greased baking pan. For
“individual” rolls place dough balls 2-inches apart.
Crescent Rolls
On lightly floured board, roll dough to 12-inch circle. Spread with
softened butter. Cut into 16 wedges beginning at wider end.
Place rolls 2-inches apart on greased baking sheet with points
underneath; curve rolls slightly. If desired, brush with melted butter
just before baking.
Store unused bread, tightly sealed (sealable plastic bags or plastic
containers work well) at room temperature for up to 3 days. For longer
storage, (up to 1 month) place bread in sealed container in freezer.
Since homemade bread has no preservatives, it tends to dry out and
become stale faster. Leftover or slightly hardened bread may be cut
into ½-inch or 1-inch cubes and used in recipes to make croutons,
bread pudding or stuffing.
USING 15-HOUR DELAY BAKE TIMER
Important: Delay baking does not activate JAM cycle. Do not use
delay bake timer if your recipe includes perishables, such as eggs,
fresh milk, yogurt or other dairy products and meats, etc. To preset
your bread maker, follow these steps:
To preset your bread maker, follow these steps:
1. Add ingredients in the order listed as usual, taking care not to let
yeast and liquid ingredients contact one another.
Note: If your recipe contains salt, add it with the liquid ingredients,
taking care to keep it away from the yeast.
2. Close bread maker lid and plug it in.
3. Press MENU to select baking cycle. Standard cycle time will be
shown in display window.
4. Press ▲ to add time in 10-minute intervals. (Use ▼ to subtract
time.) Amount of time set is shown in display window.
• To fast forward time, continually press ▲.
• To fast reverse, continually press ▼.
• For example, if it is 8:00 AM and you want bread ready at 1:00
PM, press ▲ until the display reads 5:00 – meaning it will finish
baking in 5 hours. This is the hour difference between 8:00 AM
and 1:00 PM.
Note: Actual baking times will not change.
5. Press LOAF SIZE to choose loaf size, press CRUST COLOR to choose
crust color, then press START/STOP to begin timer. The colon (:)
in time display begins to flash, letting you know timer is started.
When your bread is finished baking, bread maker will beep and
“0:00” will appear in display window. Press START/STOP and
open lid.
6. If you make an error after you’ve activated program and want to
start over, press and hold START/STOP for several seconds. Timer
will clear and you can begin again.
BAKE ONLY
The BAKE ONLY cycle offers the flexibility to vary time. You can bake
pre-made dough or dough purchased at the store using this cycle. You
may also use this cycle if crust color is too light or if your sweet bread
is not quite done. Check every few minutes.
1. Press the BAKE ONLY button to activate cycle. Adjust the amount of
time you need up to 1½ hours using the ▲ and ▼ buttons.
2. Press START/STOP button to begin baking.
SPECIAL GLAZES FOR YEAST BREADS
Select 1 of the following special glazes to enhance your bread:
• Melted Butter Crust: Brush melted butter over just-baked bread
for a softer, more tender crust.
• Milk Glaze: For a softer, shiny crust, brush just-baked bread with
milk or cream.
• Sweet Icing Glaze: Mix 1 cup sifted confectioner’s sugar with 1 to 2
tablespoons of milk, water or fruit juice until smooth. Drizzle glaze
over raisin or sweet bread when they are almost cool.
Note: If desired, generously sprinkle with your choice of nuts or seeds
after glazing.
… 8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Breadman BK1060S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Breadman BK1060S in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info