460292

Braun ExactFit BP 4900 Manual

4
Zoom out
Zoom in
Previous page
1/61
Next page
6
7
Display BP4900/BP5900
* For BP5900 only
Note: On BP5900, the Backlight goes on when the unit is turned on, buttons are pressed, or
when results are being displayed. It turns itself o after 10 seconds if no buttons are pressed.
HEART RATE SYMBOL
MEMORY RECORD
MEASURING ERROR
DISPLAY
LOW BATTERY INDICATOR
MONTH
MINUTE
DATE
HOUR
AVERAGE SYMBOL
MORNING AVERAGE RECORD*
EVENING AVERAGE RECORD*
IRREGULAR HEART
BEAT SYMBOL*
MORNING
HYPERTENSION
SYMBOL*
Fig. 9
Setting Month, Date and Time
a. Press Mode (5) button (“month” starts ashing)
Press Set (4) button to set the correct month (1,2,3,…12)
b. Press Mode
(5) button (“date” start ashing)
Press Set (4) button to set the correct date (1,2,3,…31)
c. Press Mode
(5) button (“hour” starts ashing)
Press Set (4) button to set the correct hour (1,2,3,…12)
d. Press Mode
(5) button (“minute” starts ashing)
Press Set (4) button to set the correct minute (0,1,2,3,…59)
e. Press Mode
(5) button again to lock in time settings. Digits will stop ashing.
Taking a Measurement
Wrap the cu around the arm (see “Applying the Arm Cu” section above).
1. Sit upright on the chair to have a correct posture.
2. Press the “START/STOP
” (1) button, all elements of the display indicate
“888” during the rst 3 seconds. The measuring blood pressure symbol will
then ash on the display and the air pressure will automatically pump up
to certain pressure level and start measurement. (Fig.9 BP4900/BP5900)
Do not move or talk in the midst of taking blood pressure measurement.
3. After the air pressure has increased, it will slowly decrease. When the pulse
is detected, the HEART RATE symbol will start ashing.
After taking blood pressure measurement, the product will turn o
automatically after 1 minute.
Memory Function
Your blood pressure monitor can store the latest readings of 48 measurements
for BP4900, or 99 measurements for BP5900.
Storing Measurement Data
After each blood pressure measurement, the Systolic pressure, Diastolic pressure, Pulse rate
and the time & date of specic day will be automatically stored. Memory #01 is always the most
recent one. Once the memory is full, the oldest values will be overwritten.
Recalling Stored Readings
• Press “Memory
” (2) button, M:00 will appear on the display if there is no
data stored in the memory. If there is data stored in the memory, the latest
recorded set of measurement which is the Systolic pressure, Diastolic
pressure, Pulse rate, and the recording time and date and M:01 will appear
on the display for 1 minute.
• Press the “Memory
” (2) button again to read the next line of stored data.
The data called up on the display with 2-digit Memory number (ex. M:02).
7-Day Average Function
Full day Average
• Press the “Average ” (3) button once, “Full Day Average” result will show
on LCD.
• Make sure the DATE / TIME is correct when taking measurement, so you
may get the correct 7-Day Average result.
• If there is no data in memory within past 7 days, “
” will show on LCD.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun ExactFit BP 4900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun ExactFit BP 4900 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 27,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info