695250
3
Zoom out
Zoom in
Previous page
1/18
Next page
3
Deutsch
BT32 – Styling-Aufsatz für Series 3 Rasierer*
*Typen 5416/5415/5414/5413/5412/5411
Der Kopf des Bartschneiders und die fünf Trimmeraufsätze wurden für ein
präzises und gleichmäßiges Trimmen entwickelt.
Vor dem Trimmen: Schalten Sie das Gerät aus. Nehmen Sie die Scherkopf-
kassette mit Scherfolie und Klingenblock ab und setzen Sie den Trimmer-
kopf auf. Er kann in beide Richtungen aufgesetzt werden.
Auf eine bestimmte Länge trimmen: Setzen Sie einen der Trimmeraufsätze
bei ausgeschaltetem Gerät auf den Trimmerkopf auf. Die Zahl auf dem
Trimmeraufsatz entspricht der ungefähren Schnittlänge in Millimetern. Es ist
empfehlenswert, mit einer größeren Länge zu beginnen und sie dann schritt-
weise zu verringern, bis Sie die gewünschte Bartlänge erreicht haben.
Trimmen: Schalten Sie den Rasierer ein. Halten Sie den Aufsatz mit der
abgeschrägten Seite an Ihren Bart und führen Sie den Trimmer gegen die
Haarwuchsrichtung.
Reinigung mit Wasser: Schalten Sie das Gerät ein (kabellos) und spülen
Sie den Trimmerkopf unter fließendem heißem Wasser ab, bis alle Rück-
stände entfernt sind. Die Trimmeraufsätze können ebenfalls mit Wasser
gereinigt werden.
Reinigung mit einer Bürste: Schalten Sie das Gerät aus. Verwenden Sie
die Bürste, um den Trimmerkopf und die Trimmeraufsätze zu reinigen.
Damit das Schneidsystem ordnungsgemäß funktioniert, ölen Sie es nach
jeder Verwendung mit einem Leichtmaschinenöl.
Änderungen ohne vorherige Ankündigung vorbehalten.
Weitere Informationen und die Garantiebedingungen entnehmen Sie bitte
der Gebrauchsanleitung des Rasierers.
English
BT32 – Styling attachment for Series 3 shavers*
*Types 5416/5415/5414/5413/5412/5411
The beard trimmer head and the 5 combs are designed for a precise and
even trim.
Before trimming: Turn the appliance off. Pull off the Foil & Cutter cassette
and attach the trimmer head. It can be attached either way.
Trimming to a certain length: Attach one of the combs onto the trimmer
head with the appliance turned off. The numbers on the combs correspond
to the approx. trimming length in mm. It is advisable to begin with a higher
length and step down until you reach the desired beard length.
97556212_MC_BT32_EMEA.indd 397556212_MC_BT32_EMEA.indd 3 15.07.15 12:0615.07.15 12:06
CSS APPROVED Effective Date 4Aug2015 GMT - Printed 19Oct2016 Page 2 of 18
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun BT 32 - 5414 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun BT 32 - 5414 in the language / languages: All languages as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info