8394
11
Zoom out
Zoom in
Previous page
1/71
Next page
12
For underarm and bikini line
epilation, we recommend that you
use the epilator head (without
EverSoft attachment).
To change the epilator heads,
press the release buttons on
the left and right and pull off the
epilator head.
Plug the cord connector into
the socket and plug the
transformer plug into an
electrical outlet.
1. To turn on the appliance, slide
switch up to setting «2»
(«2» = normal epilation,
«1» = gentle epilation).
2. Rub your skin to lift short hairs.
In order to make best use of the
EverSoft attachment, hold the
appliance at right angles (90°)
against your skin and guide it
against the hair growth and in
the direction of the switch. When
using the EverSoft attachment,
make sure that both wheels are
always kept in contact with the
skin. Do not press too hard.
3. Leg epilation (epilator head
with
EverSoft attachment )
Epilate your legs from bottom
upwards. When epilating behind
the knee, keep the leg stretched
out straight.
4. Underarm and bikini line epilation
(underarm epilator head )
User tests monitored by dermatol-
ogists have shown that you may
epilate under the arm and at the
bikini line as well. For this specific
application, the narrow underarm
epilator head has been developed.
Thanks to its specific design
adapted to the contours of these
areas it provides a gentle and
thorough epilation. Be aware that
these areas are particularly
sensitive to pain. However, the
pain sensation will diminish with
repeated usage.
For this specific application, we
would like to give the following
advice:
Before epilating, thoroughly clean
the respective area to remove
residue (like deodorant).
Then dry with a towel, carefully
using a dabbing action.
When epilating underarm, keep
your arm raised up and guide the
appliance in different directions.
Cleaning the epilator heads
5. After epilating, unplug the
appliance and clean the epilator
head used:
When cleaning the epilator head
, first take off the EverSoft
attachment and brush out the
rolls.
6. Thoroughly clean the tweezer
element with the cleaning brush
and also with cleaning fluid (e.g.
alcohol). While cleaning, you can
turn the tweezer element
manually. To remove the epilator
head, press the release buttons
on the left and right and pull it off.
7. Give the top of the housing a quick
clean with the brush. Put back on
8
3
6
5
7
4
2
1
8
2
1
3
5316405_2570_P6-72 Seite 12 Freitag, 24. November 2000 8:47 08
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Braun 5316 2590, 2570, 2550 EverSoft at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Braun 5316 2590, 2570, 2550 EverSoft in the language / languages: All languages as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info