802845
1
Zoom out
Zoom in
Previous page
1/2
Next page
EN
BRAINZ WIRELESS CHARGER CAR PHONE HOLDER
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND
RETAIN FOR FUTURE USE
This is what you need:
USB Cable (included)
Ventilation grille clip (included)
Threaded mounting ring (included)
Ventilation grille in your car to secure the clip
USB connection in your car
Product description:
With this car kit you are ready for the future. This phone holder opens and closes automatically around the phone. This is
controlled by a number of sensors. If you want to remove the phone from the car holder, you can do this by a simple touch
on the back. In addition to holding, a wireless charger is integrated. The holder is firmly attached to the ventilation grille with
the universal clip. Your phone must be equipped with Qi technology to charge wirelessly. Check www.brainz-electronics.nl to
check if your phone has this technology.
This is how you set it up:
Connect the phone holder by plugging the cable into the bottom of the device. Then plug the USB cable into the required
USB port in your car. Ready? On the back of the device you will find the connection for the clip with which you mount the
device. Take the clip and put the mounting ring around the round part. This is necessary to properly fix the device. Press the
round part of the clip into the back of the holder. Then tighten the mounting ring to the device. This ensures that the round
part of the clip cannot get out of the device. Ready? Then mount the device at the desired location in your car.
Have you installed the car kit in your car? Then you can now place your phone in the holder. The car kit is equipped with a
sensor. This sensor activates the car kit when you place your phone in front of it. For example, the holders of the car kit slide
apart to make room for your phone. At this point, place your phone in the holder. The car kit closes the holders the moment
you have placed your phone in it and clamps it in this way. This way your phone can never fall out of the holder while driving.
Do you want to take your phone out of the holder? No problem. The holders of the car kit separate with a simple touch on
the back of the device. This makes it easy to get your phone in and out of the charger.
Wireless charging:
Your phone must be equipped with Qi technology to charge wirelessly. Check www.brainz-electronics.nl to check if your
phone has this technology.
This manual is applicable for item number 38506.
More information about this product is available on www.brainz-electronics.nl
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BrainZ 38506 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BrainZ 38506 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info