737208
10
Zoom out
Zoom in
Previous page
1/12
Next page
Problem Solution
Kettlebell handle does not fully
insert into base when no plates
are selected (handle has no plates
attached).
1. Make certain that the adjustment knob is set directly to the number 8.
Kettlebell handle does not fully insert
into base when plates are selected
(handle has plates attached).
1. Verify that the plates not selected (those plates remaining in the kettle-
bell base) are in the correct order and have not been switched. This
may be blocking the kettlebell from fitting back into the base.
Adjustment knob will not turn while
handle is in base.
1. Check to assure that the kettlebell handle is fully depressed into the
kettlebell base. If not fully depressed, the locking mechanism will not
be released and may prevent the adjustment knob from rotating.
2. Check to see if there is any dirt, debris or other obstruction in the
kettlebell base. You may need to remove the weight plates from the
base to accomplish this check. Remember to put each weight plate
back in the correct sequence and orientation.
Troubleshooting / Warranty
Warranty (if purchased in US/Canada)
Who Is Covered
This warranty is valid only to the original purchaser and is not transferable or applicable to any other person(s).
What Is Covered
Nautilus, Inc. warrants that this product is free from defects in materials and workmanship, when used for the purpose intended, under normal conditions,
and provided it receives proper care and maintenance as described in the Product’s Assembly and Owner’s manual. This warranty is good only for
authentic, original, legitimate machines manufactured by Nautilus, Inc. and sold through an authorized agent and used in the United States or Canada.
Terms
Parts (including hand assembly, weight plates and base assembly) 2 years
For warranty & service of products purchased outside US/Canada, please contact your local distributor. To find your local international distributor, go to:
www.nautilusinternational.com or www.nautilus.cn
How Nautilus Will Support the Warranty
Throughout and as set forth under the terms of the Warranty, Nautilus, Inc. will provide a replacement for any component or part that proves to be defective
in materials or workmanship. Nautilus, Inc. reserves the right to substitute material of equal or better quality if identical materials are not available under
this warranty.
In the event that replacement parts or components do not correct the issue, Nautilus, Inc, reserves the right to replace the product or apply a limited credit
reimbursement toward another Nautilus Inc. brand product, at our discretion. Reasonable substitution may be required depending upon Product availability.
Any replacement of the Product under the terms of the Warranty in no way extends the original Warranty period. THESE REMEDIES ARE THE EXCLUSIVE
AND SOLE REMEDIES FOR ANY BREACH OF WARRANTY.
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowflex SelectTech 840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowflex SelectTech 840 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowflex SelectTech 840

Bowflex SelectTech 840 User Manual - German - 12 pages

Bowflex SelectTech 840 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info