737211

Bowflex Power-Pak 445 Manual

8
Zoom out
Zoom in
Previous page
1/8
Next page
Equipmentmustberegularlyexaminedfordamageandrepairs.Theownerisresponsibletomakesurethatregularmaintenance
isdone.Wornordamagedcomponentsmustbereplacedimmediatelyortheequipmentremovedfromserviceuntiltherepairis
made. Only manufacturer supplied components can be used to maintain and repair the equipment.
Adjustable Dumbbell Maintenance:
1. If your dumbbell handle assembly, plates or base become dirty, you can clean them with a cloth lightly dampened with warm water
andasmallamountofmildsoap.Wipedrywithaseparatecloth.
2. The adjustable dumbbell is internally lubricated and will not require more internal lubrication. The contact between weight plates
and selection discs is not lubricated but has naturally low friction. Lubrication is usually not necessary. If you feel it is necessary to
lubricatetheweightplatesand/orselectiondiscs,useonlya“foodgrade”siliconlubricant.
Donotuseanysolvents,harshdetergents,chemicalsorbleachonthisproduct-thiscandamagethematerials,resultingin
degradation of the product’s performance or strength.
Neverattempttodisassemblethedumbbellhandleorbaseassembly–theproductisnotdesignedtobeuserserviced.Doingso
will void the manufacturers warranty. Contact your local Bowflex
®
distributor or vendor for service.
Daily / Before Each Use:
Examine equipment. Make sure it looks in good condition and operates smoothly. If you find damage, DO NOT
USE.
Daily / After Each Use:
Clean equipment with a clean, dry cloth. Do not use cleansers containing enzymes.
Weekly:
Clean equipment fully with a clean cloth lightly dampened with warm water and a small amount of mild soap.
Wipe dry with a separate cloth.
Touch up any scratches with touch-up paint to prevent rust, if necessary.
Monthly:
Examine the frame for signs of cracking or permanent bending. Do not use the equipment if you see this.
Contact your local Bowflex
®
distributor or vendor for service.
Troubleshooting
Problem Solution
Dumbbell handle does not fully go into base
when no plates are attached.
1. Make sure that the adjustment knobs are set directly to the number 4.
2. Make sure that the weight plates are seated correctly in the base assembly.
Dumbbell handle does not fully go into base
when plates are attached.
Make sure that the plates that are still in the dumbbell base are in their correct spots and not
moved to different support slots. This may be blocking the dumbbell from fitting back into the
base.
Adjustment knob will not turn while handle is
in base.
1. Make sure that the dumbbell handle is fully pushed into the dumbbell base. If not fully set into
the base, the locking mechanism will not be released and will prevent the adjustment knobs from
turning.
2. Make sure that the weight plates are seated correctly in the base assembly.
3. Inspect the dumbbell base for dirt, debris or other unwanted material. If necessary, remove
the weight plates from the base to do this check. Remember to put each weight plate back in its
correct location.
Plates are not attached safely to the handle
and drop out.
Make sure that the plates that are still in the dumbbell base are in their correct spots and not
moved to different support slots.
Maintenance / Troubleshooting
EN
8000773.100112.A
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowflex Power-Pak 445 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowflex Power-Pak 445 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bowflex Power-Pak 445

Bowflex Power-Pak 445 User Manual - German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info