Manual Bowers Wilkins Pi7 (page 3 of 55) (English, German, French, Italian, Portuguese)

755350

Zoom out

Zoom in

1/55

ENGLISH

1. PI7 Carton Contents

PI7 Headphones with Ear Tips (M)

Charging Case

USB-C Charging and USB-C to 3.5mm Audio Cable

Ear Tips (S/L)

Literature Pack

2. Getting to know your PI7

2.1 Switching Headphones On and Off

Switching On/Off

PI7 does not have a power control, instead the

power management is automatic. Your PI7 earbuds

will automatically charge when placed into the

charging case, and will be ready to use when they

are removed from the case.

When your earbuds are removed from the charging

case, and not used for 5 minutes, they will enter a

power saving mode. To exit power saving mode,

start using the earbuds again by connecting your

paired device, streaming audio or placing the

earbuds into your ears.

2.2 Headphone Controls

Each earbud has a Multi-function button located on

the top cap of the earbud, see Diagram 1. The Multi-

function button controls are as follows:

Media Playback:

Function Action

Play or pause Press the Multi-function button

once.

Play to next track Press the Multi-function button

twice in quick succession.

Play previous track

Press the Multi-function

button three times in quick

succession.

Phone call functionality:

Function Action

Answer call Press the Multi-function button

once with incoming call.

End call

When incoming call occurs,

press the Multi-function button

twice in quick succession.

Decline an

incoming call

Press the Multi-function button

twice in quick succession with

incoming call.

3. Intelligent Features

3.1 Adaptive Noise Cancellation

Noise cancellation is a series of advanced

technologies that aids in removing undesired noise

from the surrounding environment.

PI7 features our latest innovations in adaptive noise

cancellation, this includes intelligent sensing that

adapts noise cancellation and tuning best suited to

your surrounding environment. As your surroundings

change, noise cancellation will auto adapt to

complement your new environment.

The noise cancellation features is activated by

pressing the left (L) earbud Multi-function button for

1 second, additional 1 second presses cycle through

the modes: On, Auto or Off. See Diagram 2 for

button location.

Diagram 1

Multi-function button

Diagram 2

Headphone controls

Mode Application

On Removes undesired noise from the

surrounding environment.

Auto

Intelligently adapts noise cancellation

best suited to your current

environment.

Off Turns off the noise cancellation feature.

3.2 Voice Assistance

Voice Assistance is activated by pressing the right

(R) earbud Multi-function button for 1 second. See

Digram 2 for button location.

3.3 Ambient Pass-Through

PI7 features ambient pass-through which lets some

external noise from the surrounding environment,

such as safety announcements or conversations, to

be heard without taking the headphones off.

Ambient pass-through can be enabled or disabled

through Bowers & Wilkins headphone App. The

level of ambient pass-through, High/Low/Off, can be

adjusted to suite your needs through the App.

Noise Cancelling Voice Assistant

3.4 Wear Sensors

PI7 incorporate our latest enhanced wear detection

sensors in both earbuds. The sensors enable

intelligent battery conservation by entering power

saving mode when removed from the ears. When

worn again, PI7 automatically wakes and connects

to the last connected Bluetooth device.

The sensors will also pause audio when the earbuds

are removed from your ears. Playback will auto

resume when the earbud is placed back in the ear.

Auto resume has been further optimised so it is

ready only when you are.

Wear sensor can be turned off from the Bowers &

Wilkins Headphone App.

Note: Take special care when wearing your

earphones, hair or accessories trapped between

your ears and the earbuds may interfere with

proximity sensing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins Pi7 in the language / languages: English, German, French, Italian, Portuguese as an attachment in your email.

The manual is 2,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bowers Wilkins Pi7 Manual

Product: