562446
3
Zoom out
Zoom in
Previous page
1/113
Next page
3
ENGLISH
Overview
Panorama 2 is a complete home theatre audio
system contained in one easily installed unit that
can be wall or table mounted. It incorporates a 5.1
channel home theatre audio decoder along with
front, centre, surround, and subwoofer speakers
and their drive ampliers. An additional active
subwoofer can be connected and Panorama 2
will automatically detect its use and adjust its own
settings appropriately.
Panorama 2 incorporates four HDMI digital audio/
video interface sockets and one combined digital/
analogue audio input socket. The HDMI interface
sockets enable the connection of digital audio/video
sources to Panorama 2. One of them is specically
intended to be used to connect a television. The
combined digital/analogue audio input enables
non-HDMI audio sources to be connected to
Panorama 2.
The Panorama 2 HDMI sockets specically intended
for the connection of a television enables the video
element from other audio/video sources to be routed
via Panorama 2 to the television. If the television
incorporates an HDMI Audio Return Channel
(ARC), television based audio signals will also be
automatically routed to Panorama 2 via this HDMI
connection.
Panorama 2 is controlled by an intuitive front panel
user interface combined with a simple remote
control handset. Setup and conguration is achieved
through a simple menu based on screen display
using the HDMI connected television.
1. Panorama 2 carton contents
Panorama 2
Wall bracket
Quick Start Guide
Warranty and registration documents
Remote handset
Power cord
4 x 25mm feet
4 x 35mm feet
Mini-Toslink optical connection adaptor
Micro-bre polishing cloth
2. Installing Panorama 2
2.1 Panorama 2 Location and Mounting
The home theatre surround performance achieved
by Panorama 2 will be optimised if it is located in
the room approximately symmetrically between
two sound-reective walls. Figure 1 illustrates two
possible room layouts. Panorama 2 can be either
mounted on a table centrally in front of the home
theatre TV or be wall mounted using the supplied
bracket centrally above or below the TV.
Note: A Panorama 2 setup function enables
selection of bass equalisation characteristics
appropriate to either wall or table locations. See
Section 4.1.
If Panorama 2 is to be table mounted the bracket
is not required. Panorama 2 may be either placed
directly on the table or raised using one of the
sets of feet supplied. Tot the feet carefully turn
Panorama 2 upside-down on the surface and screw
them into the tapped holes. Figure 2 illustrates tting
the feet.
If Panorama 2 is to be wall mounted, the bracket
screw hole positions on the wall mustrst be
established. Use a spirit level to ensure the bracket
is level before marking the hole positions. Drill and
Figure 1
Possible room layouts
Figure 2
Fitting the feet
Figure 3
Using the wall bracket
OFFSET
DISTANCE
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bowers Wilkins Panorama 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bowers Wilkins Panorama 2 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 14,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info