497145

Boston Acoustics soundware XS 2.1 Manual

5
Zoom out
Zoom in
Previous page
1/7
Next page
5
E
N
G
L
I
S
H
The SoundWare speakers pivot on their mounts. Vertically they can go from
facing straight out to being tilted down 40 degrees. When the flat wall
mounting bracket is used they can pivot side to side 20 degrees. (Note:
Corner mounting will not allow the speaker to pivot side-to-side.) Loosen the
pivot set screw on the front of the pivoting ball mount, pivot the speaker into
position and retighten the screw.
The SoundWare speakers can also be mounted using
the supplied corner bracket.
Subwoofer Connections
NOTE: Power is always supplied to the subwoofer electronics unless it is unplugged or switched to the o position using the
power switch located on the rear panel. The auto-on circuitry only activates or deactivates the power amplifier. Make sure
your subwoofer and receiver are unplugged when making the connection.
Power: When plugging your subwoofer in be sure to use a wall outlet, or dedicated electrical outlet. Some receivers will
provide a switched outlet. Do not use this. These on board electrical outlets do not offer the amount of current or proper
isolation required by a power amplifier, such as the one in your amplifier.
Speaker Level
Use these high-level terminals with receivers that do not have a subwoofer output. The speaker inputs accept both left and
right channel speaker signals from your receiver. When using a home theater receiver, set the speaker type to “Large.”
The large setting will produce a fuller sound.
Optional: Connect the satellites to the output speaker terminals on the subwoofer.
Adjusting the Crossover Control
When using the Speaker Level inputs (not the LFE input) the subwoofer’s built-in crossover is engaged. Set the crossover
control on the subwoofer to 180Hz. Fine-tune the crossover setting by ear for the smoothest blend with your main speakers.
The best setting of the crossover control will depend on speaker placement and personal preference.
pivots
down 40°
pivots 20°
each way
Receiver Subwoofer Amplier
Speakers
Subwoofer Amplier
Speakers
Receiver
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boston Acoustics soundware XS 2.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boston Acoustics soundware XS 2.1 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info