721908
5
Zoom out
Zoom in
Previous page
1/36
Next page
SAFETY INSTRUCTIONS
IMPORTANT READ CAREFULLY: It is important that all operators read and understand all
sections of this Tool Technical Data manual and the separate Safety and Operating Instruction
Manual which come with this tool. Failure to do so could result in you or others in the working area to be
seriously injured.
WARNING! Eye protection in accordance with 89/686/EEC, and with equal or greater grade than
defined in EN166 should be used. However all aspects of operators work, environment and other type/s of
machinery being used, should also be considered when selecting any personal protection equipment.
Note: Non-side shielded spectacles and face shields alone do not provide adequate protection.
WARNING! To prevent accidental injuries:
Never place a hand or any other part of the body in fastener discharge area of tool.
Never point tool at yourself or anyone whether it contains fasteners or not.
Never engage in horseplay.
Never pull the trigger unless the nose is directed towards the work.
Always handle the tool with care.
Do not pull the trigger or depress the trip mechanism whilst loading the tool.
To prevent accidental actuation and possible injury, always disconnect air supply.
1. Before making adjustments. 2. When servicing the tool. 3. When clearing a jam. 4. When tool is not in
use. 5. When moving to a different work area, as accidental actuation may occur, possibly causing injury.
Read the additional Safety & Operating instructions booklet before using tool.
Do not use oxygen and combustible gases as an energy source for pneumatically operated tools.
The operation of this tool can cause sparks and act as a source of ignition for flammable fuels and
gases.
1. Depress magazine release button and pull back magazine. (Fig 1a & 1b)
2. With magazine fully open, insert fasteners. Points must be against bottom of
magazine. (Fig 2a & 2b)
3. Push magazine forward. (Fig 3)
4. Continue pushing until latch is engaged. (Fig 4)
1. Depress magazine release button and pull back magazine. (Fig 5)
2. Open magazine fully. Turn tool sideways with discharge area pointed away from
yourself & others. Load staples in channel. (Fig 6)
3. Push magazine forward. (Fig 7)
4. Continue pushing until latch is engaged. (Fig 8)
1. Open the magazine: Pull pusher back to engage latch. (Fig 9)
2. With magazine fully open, insert fasteners. Points must be against bottom of
magazine. (Fig 10)
3. Close magazine: Release latch by pulling latch tab and pusher together
slightly to disengage, slide pusher against the nails. (Fig 11)
“DIAL-A-DEPTH™” FASTENER CONTROL ADJUSTMENT (FIG 12A-12B)
The DIAL-A-DEPTH™ Fastener Control adjustment feature provides close control of the fastener drive depth;
from flush with the work surface to shallow or deep countersink. First, set the air pressure for consistent drive
in the specific work, then use the DIAL-A-DEPTH™ Fastener Control adjustment to give the desired depth of
drive.
GB
SB-1842BN,
SB-1850BN,
SB-2IN1,
SB-HC50FN
(Figs 1-4)
SB-150SX,
SB-150SXHD
(Figs 5-8)
SB-1664FN
(Figs 9-11)
FT60032-b-909_HCFN_Manual:WS60032 HCFN Manual 27/10/09 13:49 Page 5
GB ©Stanley Bostitch. Not to be reproduced without permission. Unauthorised copies of this
document do not constitute CE compliance for the products.
F ©Stanley Bostitch. Reproduction interdite sans permission préalable. Les copies non autorisées
de ce document ne signifient en rien que les produits soient conformes aux normes CE.
D ©Stanley Bostitch. Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte
Kopien dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.
NL ©Stanley Bostitch. Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige
kopieën van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten.
DK ©Stanley Bostitch. ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument
udgør ikke CE overholdelse for produkterne.
SF ©Stanley Bostitch. Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt
kopiot eivät muodosta tuotteille CE-yhdenmukaisuutta.
G ©Stanley Bostitch. Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη
εξουσιοδοτημένα αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για
τα προϊόντα.
I ©Stanley Bostitch. Vietata la riproduzione senza permesso. Le copie non autorizzate di questo
documento non garantiscono la conformità CE per i relativi prodotti.
N ©Stanley Bostitch. Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette
dokumentet oppfyller ikke kravene for CE-merking for produktet.
P ©Stanley Bostitch. Reprodução proibida sem autorização prévia. As cópias não autorizadas
deste documento não estão em conformidade com a CE para os produtos.
E ©Stanley Bostitch. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
documento no suponen la conformidad con las normas CE de los productos.
S ©Stanley Bostitch. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
documento no suponen la conformidad con las normas CE de los productos.
PL ©Stanley Bostitch. Niniejszy dokument nie może być kopiowany bez pozwolenia.
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
prezentowanych produktów.
CZ ©Stanley Bostitch. Niniejszy dokument nie może być kopiowany bez pozwolenia.
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
prezentowanych produktów.
SK ©Stanley Bostitch. Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto
dokumentu nie v súlade s CE pre dané výrobky.
HU ©Stanley Bostitch. A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül
sokszorosított dokumentum nem jelenti a termék CE-megfelelőségét.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bostitch SB-1664FN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bostitch SB-1664FN in the language / languages: All languages as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info