704341
6
Zoom out
Zoom in
Previous page
1/12
Next page
PURPOSE
Determination of body temperature of persons
TURNING ON THE THERMOMETER
The device must be installed and put into operation
in accordance with the instructions in this manual.
To get help concerning usage or maintenance plea-
se contact your dealer or the manufacturer.
An unexpected operating condition or an incidence
which has worsened the health condition or could
have worsened the health condition should be
reported to the manufacturer immediately.
To turn on the thermometer, push the ON/OFF-button
next to the display; a short signalling tone [beep] in-
dicates «thermometer ON.» A so-called LCD-test
automatically takes place to check the display. Then
«---» and a flashing «°C» appear on the upper right of
the display, if the ambient temperature is less than
32°C. Now the thermometer is ready for use.
USING THE THERMOMETER
During a measurement, the temperature is displayed
continuously and the «°C» symbol flashes. If the sig-
nalling tone sounds (beep-beep-beep-beep 10 times)
and the «°C» no longer flashes the measurement is
completed (the measured increase in temperature is
now less than 0,1 °C in 8 seconds).
To extend the lifetime of the battery, turn off the ther-
mometer after usage by pressing the ON/OFF-button
briefly. Otherwise the thermometer will automatically
turn off after about 10 minutes.
REVIEWING THE LAST MEASUREMENT
Press ON/OFF button for 2 seconds, when turning on
the thermometer. The last measurement will be di-
splayed together with a «M» for memory.
After 2 seconds, the thermometer will automatically
switch off.
CLEANING AND DISINFECTING
For cleaning of the instrument please use isopropyl
alcohol (70%). For disinfecting wipe the instrument
completely with Antifect Liquid (please obey 5 min.
work-in-time).
CHANGE OF BATTERY
As soon as the symbol «
» appears on the display,
the battery is weary and a new battery has to be in-
serted. Open the cover of the battery compartment
and insert the new battery with «+»symbol facing up-
wards.
TECHNICAL SPECIFICATIONS
Maximum thermometer
Measuring range: 32.0°C to 42.9°C
Temp.< 32.0°C:display «---» for low (too low)
Temp.> 42.9°C:display «H» for high (too high)
Accuracy: ± 0.1°C between 34°C and 42°C at an am-
bient temperature of 18°C to 28°C
Operating conditions: environmental temperature
+10°C to +40°C, relative humidity 15 to 95%
Self-test: automatic internal check at a test value of
37.0°C; if there is a deviation of >0.1°C, «ERR» (error)
is displayed.
Liquid crystal display (LCD) with three digits. Smallest
unit of display: 0.1°C
Signalling tone sounds when thermometer is ready
for use and when measurement is completed.
Memory: automatic memory of the last measured va-
lue.
Storage conditions: environmental temperature -
25°C to +60°C, relative humidity 15 to 95%
Battery: 1,5 V, IEC-type LR/SR 41
1,000 measurement cycles (depending on frequency
of use).
Type BF applied part
Norm: EN12470-3, clinical thermometers
Protection against solid objects and water: IP67 (in ac-
cordance with IEC 60529)
Expected operational lifetime of the equipment: 10
years
WARRANTY
This unit is under warranty for 2 years from the date
of purchase.
Please submit the receipt, invoice or delivery note
when claiming for warranty.
For both, warranty and repair, please send the instru-
ment carefully packed and postage paid either to
your authorized dealer or directly to
BOSCH + SOHN GMBH U. CO. KG
Bahnhofstr. 64
72417 Jungingen – Germany
Warranty and repair work must be undertaken by trai-
ned and authorised personnel. Do not modify this
equipment without authorization of the manufacturer.
CARE FOR THE ENVIRONMENT
Used batteries and defective electronic devices do
not belong into the household waste.
They can be deposited at special centres. Please
contact your local authorities for information.
IEC 60 417-53 33
T
YPE BF APP LIED PART
boso_bosotherm_flex_kpl_1902sd.qxd:boso_bosotherm_flex_kpl_805 12.02.2019 12:41 Uhr Seite 6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boso Bosotherm Flex at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boso Bosotherm Flex in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info