571108
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
SYSTEM SETUP
SYSTEM SETUP
EnglishFrançais Español
Installing or replacing the remote batteries
1. On the back of the remote, slide open the battery compartment. If you are replacing
batteries, remove and discard the old batteries.
2. Insert two new AA (IEC-R6) 1.5V batteries, or their equivalent, as shown in Figure 15.
(Two AA batteries are supplied in the product carton.) Match the plus (+) and minus (–)
marked on the batteries with the plus (+) and minus (–) inside the battery compartment.
3. Slide the battery compartment cover back into place.
Note: R
eplace the batteries when the remote control stops operating or its range seems reduced.
Figure 15
Installing the remote
control batteries
Setting up the remote to control other sources
The universal remote control provided with your CineMate
speaker system can be
programmed to control your TV, cable/satellite box, VCR, DVD player, and Digital Video
Recorder (DVR) such as TiVo brands or ReplayTV brands. With the CineMate universal
remote, you can enjoy the convenience of using only one remote control for all your home
theater equipment.
Finding device codes
In order to control your TV and other sources with the universal remote control, you must
program the remote with a five-digit device code for each source.
To find device codes for your source, see the CineMate Universal Remote Device Codes
book included in the product carton.
Note: More than one code may work with your particular brand of device. If you notice a lack of
response or limited functionality after setting up the remote, try a different code.
To control your TV
The steps below show how to set up the remote to control your TV. To set up the remote to
control other sources, you will need to follow the same procedure, using the appropriate
device code and source button for each source.
1. Locate the TV section in the CineMate Universal Remote Device Codes book.
2. Locate the five-digit device code(s) for your brand of TV and start with the first one.
3. Press and hold Setup on the remote until all five source buttons light up.
(2) AA batteries (IEC-R6)
Battery compartment cover
+
+
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose Cinemate GS series II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose Cinemate GS series II in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose Cinemate GS series II

Bose Cinemate GS series II User Manual - English - 124 pages

Bose Cinemate GS series II User Manual - Dutch - 32 pages

Bose Cinemate GS series II User Manual - French, Portuguese, Spanish - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info