418437
15
Zoom out
Zoom in
Previous page
1/21
Next page
AM194646_02_V.pdf October 22, 2001 13
English
Using Your Acoustimass
®
10 Series II Speaker System
For realistic home theater sound
Each speaker produces only the sound directed to it by the steering logic in your surround-
sound receiver. During a surround-sound program the front and center speakers will emit
sound almost constantly, while the surround speakers may be silent for periods of time.
Setting your Dolby Pro-Logic receiver
You must set the volume levels for the front, center, and surround speakers at your receiver.
You can adjust these levels at the receiver or with the remote control. Your receiver may have
a test tone to help you set volume levels. If it does, follow these steps:
Press test tone ON at the remote.
Set the volume for the speakers in the following order: Left, Center, Right, Surround.
Balance the pink noise tone for evenness among all individual speakers.
Instructions for this process vary, depending on the brand and model of receiver you are
using. Follow your receiver owners guide for testing and adjusting the balance of each
speaker.
For use in video applications, be sure the SURROUND-SOUND center mode setting of your
receiver is on NORMAL (Figure 11).
Figure 11
A Dolby Pro-Logic receiver set
for NORMAL surround-sound
6
7
8
9
10
11
12
13
14
15
16
17
18
19
21
20
22
23
24
25
26
27
28
29
30
5
4
3
2
1
0
Setting your Dolby Digital (AC-3) receiver
Your Acoustimass 10 Series II speakers are compatible with the output from Dolby Digital
(AC-3) receivers. Take special care to set the channel output according to the specifications
listed in the chart below. The cube speakers are full-range loudspeakers and must be set up
as LARGE speakers at the receiver or its TV screen menu. Turn the subwoofer OFF, but turn
the LFE (low frequency effects) ON. If available, set the crossover frequency to 200Hz.
Speaker Setting at receiver
Left and Right Front Large
Center Large
Left and Right Surround Large
LFE (low frequency effects) ON
Subwoofer OFF
Crossover frequency 200Hz
Bass and treble adjustments
Upholstered furniture, wall-to-wall carpets, or heavy drapes can muffle treble (high notes),
making your speaker system sound bass heavy. Bare floors and walls and hard surface
furniture can make your speaker system sound too shrill. After listening to your speakers, you
may want to adjust the balance of bass and treble. You can use the bass and treble controls
on your receiver.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose acoustimass 10 ii at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose acoustimass 10 ii in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose acoustimass 10 ii

Bose acoustimass 10 ii User Manual - German - 17 pages

Bose acoustimass 10 ii User Manual - Dutch - 17 pages

Bose acoustimass 10 ii User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info