450967
11
Zoom out
Zoom in
Previous page
1/12
Next page
11
REFERENCE
TAB 5TAB 4TAB 6TAB 8TAB 7English TAB 3TAB 2
Troubleshooting
Problem Possible solution
The speakers do
not play
Check the settings on your receiver/amplifier. Refer to the owner’s guide that came with it for
instruction on settings.
If other stereo speakers are connected to a second set of audio outputs on your amplifier/
receiver, make sure to select the proper A or B speaker setting to match the A or B outputs
connected to your Virtually Invisible
®
791 speakers.
Only one speaker
plays
Check the balance control on your receiver/amplifier and make sure it is centered.
Trace the cord from the speaker in question to the receiver/amplifier and make sure no wires
from the + and – terminals on the receiver/amplifier are touching.
Disconnect the cord from the receiver/amplifier channel and reconnect it to a different
receiver/amplifier channel.
If the performance is now fine, the problem lies in the original receiver/amplifier channel,
the component source of the music, or the connections between the receiver/amplifier and
the source. Check all of those to make sure they are performing properly. Reconnect the
speaker to the proper channel of a functioning receiver/amplifier.
If the problem persists, its source is either the speaker wire or the speaker in question.
Follow the next instruction.
Check the cable connected to the speaker in question to be sure that no wires from the +
and – terminals are touching.
Disconnect the cord from the speaker in question and reconnect it to another speaker.
If the performance is now fine, the problem lies in the original speaker. Contact your
authorized Bose
dealer, who will arrange for service. Or, to contact Bose directly, refer
to the address list included in the carton.
If the problem persists, its source is the speaker wires. Follow the next instruction.
Replace and re-run the speaker wire only after you have followed the procedure above
and find no other source of the problem.
The bass or treble
is weak
Check the tonal balance setting on your receiver/amplifier.
Check for gaps between the speaker frame and the ceiling surface.
Trace the cord from the speaker in question to the receiver/amplifier and switch the wires
connected to the + and – terminals at that end.
– If this strengthens the bass performance, the problem was caused by inconsistent polarity
of the connections made at either end of the cable.
Disconnect the cord from the receiver/amplifier channel and reconnect it to a different
receiver/amplifier channel.
Static or noise from
one speaker
Trace the cord from the speaker in question to the receiver/amplifier. Make sure the wires are
in good condition, are firmly connected, and are not touching across terminals.
Check the connections from the source of the music to the receiver/amplifier.
Unscrew the speaker clamps and remove the affected speaker to reveal the cable. Make
sure the wires are in good condition, are firmly connected, and are not touching across
terminals.
If the previous efforts do not solve the problem, refer to the proposed solutions for “Only one
speaker plays” above.
00_791_Speaker_IG.book Page 11 Tuesday, January 26, 2010 1:21 PM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose 791 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose 791 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose 791

Bose 791 User Manual - German - 12 pages

Bose 791 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info