450967
8
Zoom out
Zoom in
Previous page
1/12
Next page
8
INSTALLATION
EnglishTAB 6TAB 8 TAB 7 TAB 3TAB 5 TAB 2TAB 4
Finishing the installation
It is important to have all of your equipment ready and
within easy reach to complete this procedure.
Securing the speaker
As you lift the speaker, keep the speaker cable above
and out of the way to prevent pinching it.
You may notice a security brace, located on the upper
edge of the speaker, for use where local building codes
require it.
1. Use two hands to hold the edge of the speaker as
you guide it into the ceiling hole.
CAUTION: Be sure not to press on the two small drivers
seated on the face of the speaker.
CAUTION: Be careful not to damage or remove any of
the foam gasket material along the edge of the speaker.
This gasket is important to the operation of the speaker.
2. Use the small arrow on the inside flange of each
speaker to properly orient the speaker for your
installation.
Refer to “Placement guidelines” on page 4 to review
guidelines for orienting the speakers relative to one
another.
IMPORTANT CONSIDERATIONS:
You can use a Phillips-head screwdriver to tighten the
screws on the speaker clamps. These clamps exert
pressure inside the ceiling to hold the speaker firmly in
place.
If you choose to use a screw gun or power drill with a
Phillips-head bit:
Select the lowest torque setting to begin.
If the screw does not seat properly, use the next
highest torque setting to finish securing the screw.
Or use a Phillips-head screwdriver to finish this
manually.
3. Tighten one of the four clamp screws until you
can feel the frame press firmly against the ceiling.
This indicates that the clamp is extended and is
gripping the ceiling.
CAUTION: Tighten these screws firmly, but avoid using
so much pressure that the clamps compress the ceiling
material. This can cause the material to crumble, creating
an uneven surface with gaps between the speaker face
and the ceiling.
Security brace
Arrow
One of four
clamp screws
Clamp
00_791_Speaker_IG.book Page 8 Tuesday, January 26, 2010 1:21 PM
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose 791 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose 791 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose 791

Bose 791 User Manual - German - 12 pages

Bose 791 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info