582025
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
Setting Up
Make the connections
Just press the terminal tab on the back of each speaker to insert the appropriate wire (Figure 3).
CAUTION:
Before making any connections, turn off your receiver and unplug it from the AC
power (mains) outlet. Not doing so may result in damage to your system.
CAUTION:
Never use broken or frayed wiring, which can result in electrical shock or dam-
age.
1. Connect one speaker cord to your right speaker.
Attach each marked wire (+) to the appropriate (+) terminal.
Attach each plain wire (–) to the appropriate (–) terminal.
2. Connect the other end of the same cord to the RIGHT SPEAKER OUTPUT of your
receiver.
Attach each marked wire (+) to the appropriate (+) terminal.
Attach each plain wire (–) to the appropriate (–) terminal.
3. Connect the second cord to the left speaker and LEFT SPEAKER OUTPUT. Follow the
steps in 1 and 2 above.
Figure 3
How to make terminal con-
nections
Test the speakers
To make sure your speakers operate correctly:
1. Turn on your receiver. Set the receiver to MONO (monophonic), if that is an option on your
receiver.
2. Make sure that all special effects (such as surround sound) are turned off.
3. Set the balance control to normal (center position).
4. Play some deep bass passages of music through the speaker.
The sound should seem to come from a point between the two speakers. The bass should be
full and natural. If it is not, one of the connections may be reversed, causing the speakers to
play out of phase (refer to “Make the connections” above).
To correct the problem, make sure all the wires are connected positive to positive (+ to +) and
negative to negative (– to –). Then repeat steps 1 through 4 above to re-test the speakers.
+
+
+
Red
Black
Red
Black
301
®
series V 201
®
series V
AM264981_01 _V.pdf • August 13, 2002
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose 301 Serie V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose 301 Serie V in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info