476070
7
Zoom out
Zoom in
Previous page
1/8
Next page
c @c c
L
I
c÷@c
+ @
+ @
+ @
L I
a+ + +c c
a
a
Ĕ
9
Technical data
ʠ
Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)
Weight approximately 36 kg
Max. capacity 7 kg
Ambient temperature 5 - 35 °C
Connection voltage
Connected load
Fuse protection see appliance rating plate
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
ʠ
Consumption rates
These are guide values determined under standard
conditions. Fluctuations up to 10% are possible.
Spin speed in rpm
(residual moisture)
Drying time
in min.**
Energy
consumption
in kWh**
L Cottons 7 kg 13 A 13 A
+cCupboard Dry* 1400 (approx. 50 %)
86 3.24
1000 (approx. 60 %)
103 3.92
800 (approx. 70 %)
117 4.48
cIron Dry* 1400 (approx. 50 %)
57 2.03
1000 (approx. 60 %)
74 2.86
800 (approx. 70 %)
88 3.47
I Synthetics 3.5 kg
+cCupboard Dry* 800 (approx. 40 %)
37 1.18
600 (approx. 50 %)
44 1.48
*Test program according to DIN EN 61121.
**The values may differ from the those specified depending on the type of fabric, mixture
of laundry to be dried, residual moisture in the fabric and loading capacity.
ʠ
Drum interior light (depending on model) (bulb E14, 25 W)
The drum is illuminated after the door is opened or closed, and also after the programme
is started. It goes out automatically. Replacing the bulb
a
Page 10.
Optional accessories (order from the after-sales service using the order number)
Exhaust air set (depending on model)
The exhaust air is conveyed directly via a hose.
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. This connection set must always be used to secure the dryer to the washing
machine. With pull-out worktop: WTZ 11300
Installation underneath the worktop
Risk of electric shock!
Instead of the appliance covering plate, you must have a metal cover fitted by an expert.
WTZ
1130
WTZ
11310
WTZ
10290
10
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service.
We will always find an appropriate solution and will avoid unnecessary visits by engineers.
Trust the expertise of the manufacturer and rest assured that the repair will be carried out by
trained service technicians using original spare parts. The contact details of your local after-
sales service can be found in the enclosed after-sales service directory, or by calling one of
these numbers:
GB 0844 8928979 (Calls from BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
ʠ
The ĔStart/Stop indicator lamp
does not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The Filter/Venting Hose ./đ and
ĔStart/Stop indicator lights are
flashing.
Clean the fluff filter under running water a Page 4
Exhaust air duct blocked or knicked? a
Clean the exhaust air duct a Page 6.
If necessary, clean the insect screen on the exhaust air pipe.
ʠ
Dryer does not start. ĔStart/Stop button selected?
Door closed?
Programme set?
ʠ
The door opens by itself and/or
the Door indicator light is lit.
Push the door closed until you hear it engage.
ʠ
Programme terminated shortly
after starting.
Ambient temperature higher than 5 °C?
ʠ
Water is running out. Align dryer horizontally.
ʠ
Creasing. Laundry load exceeded?
Remove articles of clothing immediately after
the end of the programme, hang up and pull into shape.
Unsuitable programme selected a Page 7.
ʠ
Drying result is not satisfactory
(laundry feels too damp).
Warm laundry feels damper than it actually is.
The selected programme does not suit the load. Use another
drying programme or, in addition, select the time programme a
Page 7.
Use fine adjustment for the drying result a Page1/2 and 6.
Fine layer of limescale on the humidity sensors
a Clean the humidity sensors aPage 6.
Programme termination, e.g. tank full, mains power supply failure,
door open or maximum drying time reached.
ʠ
Drying time too long. Rinse the fluff filters under running water a Page 4.
Insufficient supply of air a ensure that air can circulate.
Air inlet possibly blocked a Clear inlet a Page 8.
Ambient temperature higher than 35 °C a ventilate the room.
ʠ
The humidity in the room
increases significantly.
Make sure the room is sufficiently ventilated.
ʠ
One or more indicator lights for
programme status are flashing.
Clean the fluff filter under running water
a
Page 4.
Check installation conditions
a
Page 8.
Exhaust air duct blocked or knicked? a
Clean the exhaust air duct a Page 6.
If necessary, clean the insect screen on the exhaust air pipe.
Switch off, leave to cool down, switch on again, restart
programme.
ʠ
Mains failure. Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate.
ʠ
The interior light is not working
(depending on model).
Pull out the appliance plug, remove the cover cap in the interior
above the door (use Torx 20 screw driver) and replace the bulb.
Close the cover cap.
Never operate the dryer without a cover cap.
ʠ
Condensation in the exhaust air
duct.
Exhaust air duct too long? Check the maximum exhaust air duct
length. Further information a Installation instructions for exhaust
air duct.
a
a
a
a
a
a
a
a
a
a
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch WTV74100NL - Maxx 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch WTV74100NL - Maxx 6 in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch WTV74100NL - Maxx 6

Bosch WTV74100NL - Maxx 6 User Manual - German - 8 pages

Bosch WTV74100NL - Maxx 6 User Manual - Dutch - 8 pages

Bosch WTV74100NL - Maxx 6 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info