Using Your Iron
1
max.
L. Shot of steam
K. Auto shut off
indicator lamp
J. Power cable
I.
G. Pointer
F. Max. Water level
D. Water tank
C. Spray
outlet
B. Water
tank cover
A. Steam
regulator
E. Soleplate
N. Beaker
*
M. Spray button
H Te
control
O. "Clean" button *
(* model dependent)
2
Set the steam regulator (A) to the “ ”position and
unplug the iron from the mains!
1.
2.
the “max” mark (F).
Use
it. as will
the appliance.
Any damage caused by the use of the aforementioned
products, will make the guarantee void.
Do
or
normal tap water.
To
water
water with distilled water 1:2.
You
supplier.
45º
8
This can be used to remove stubborn wrinkles.
1.
2. Make sure that there is water in the tank (D).
3. When ironing, press the spray button (M) and water will spray
out of the spray outlet (C) onto the garment.
9
1.
2. ” position.
3.
4.
until all the water has come out.
5.
soleplate cool Wipe housing
with a damp cloth only.
lf cloth melts due to too high temperature on
the soleplate, switch off the steam and rub off the residue
immediately with a thickly folded, dry cotton cloth..
6. power (J) the of
before storing.
7.
10
This iron is equipped with an anti-drip system.
This
selected temperature setting is too to prevent water from
dripping
this system is in operation.
11
This iron is equipped with an auto-shut off system.
The “secure” auto shut-off function switches off the iron
automatically
accidents
in,
reach the set temperature.
If
the iron will automatically switch off.
The length of
left in:
Horizontally (flat) or on its side: 30 seconds
Vertically (upright): 8 minutes
The
shut-off has been activated. To switch the
gently from side to side. The light will stop flashing.
12
This iron is equipped with the following de-scaling
features “AntiCalc”.
A. self-clean
Each
cleans the mechanism of any scale deposits.
B. Calc’nclean
(model dependent)
The “calc’nclean” function helps to remove scale particles out
of
weeks, if the water in your area is very hard.
1.
(A) to the position and fill the water tank (D) with water.
2.
the iron.
3.
Then, unplug the iron (very important!).
4. the iron over a Press the “clean” button (O) until
approximately one third of the water capacity of the tank is
evaporated.
scale or deposits that might be there.
5.
seconds.
6.
Then
water has evaporated.
7.
soleplate with a damp cotton cloth only.
C. anti-calc cartridge
Th
sc
of
all
13
The self clean function helps remove lime scale that has
built up around the steam valve.
This should be performed once every 3 or 4 uses.
1.
“
help loosen any lime scale and clean the valve inside.
2.
over a
This
the holes in the soleplate (E).
Fabric protection soleplate cover “Protect”
(Model dependent)
The fabric protector
at maximum temperature without damaging them. Use of the
protector does with cloth prevent
shine on dark materials.
It is advisable to first iron a on the inside of the
garment to see if it is suitable.
To attach
the
the
the
the iron.
The
Bosch online shop.
Accessory code
(After-sales)
Name of accessory:
Protect cover soleplate
(online shop)
464851 TDZ1510
Cleaning and Maintenance
For general cleaning, follow the information below:
Problem Solution
Dirty/lightly marked iron
body or soleplate
Clean the body of iron or soleplate with a damp
cloth then dry it.
Mark develops on
soleplate during use
Set the iron to its maximum temperature
setting. Rub the iron a few times over with a dry
cotton cloth folded several times.
Heavily stained soleplate While the iron is cold, iron a linen cloth soaked
in white vinegar. Then dampen a cloth with
water and wipe the soleplate clean and dry
thoroughly.
DO NOT
or
steam function.
DO NOT use a “professional steam cleaner” for cleaning the
appliance.
DO
or
con
Steam setting
Temperature
Setting Recommended Steam
Regulator Setting
••• to “max” e and
•• e
*in comparison to the maximum steam setting of a
regular 2400 Watt max Bosch iron.
No
to“ ”
position to avoid water dripping from the soleplate (E).
Tip: for better
to dry the garment.
5
This can be used to remove stubborn wrinkles or to
press in a sharp crease or pleat. It cannot be used on a
synthetic setting for delicate items.
1.
2.
intervals of 5 seconds.
6
This can be used to remove creases from hanging
clothes, curtains etc. It cannot be used on a synthetic
setting for delicate items.
WARNING! Do
Never spray or aim steam at people or animals!
1.
2.
3.
garment being steamed.
4.
5 seconds,
to allow for continued steam production.
7
This function enables the iron to be used for dry ironing.
1. “ ” position.
2.
ironed.
3
The temperature control (H) adjusts the temperature of
the soleplate (E).
1.
the
(H)
(G) on the iron:
Fabric Temperature Setting
Synthetics •
Silk - Wool ••
Cotton - Linen •••
2.
start and
accordingly.
temperature for the most delicate material.
3. woollen or synthetic materials iron the reverse side
of
function to prevent stains.
4.
with clothes that have to be ironed at the lowest temperature.
5.
out
few seconds after the lamp goes out before you start ironing.
Once
lamp comes on again.
6.
off
4
The steam regulator (A) is used to adjust the amount of
steam produced when ironing.
1.
2
a
3.
energy saving*) can be used for most fabrics. The
steam
there are still wrinkles.
