746066
1
Zoom out
Zoom in
Previous page
1/10
Next page
1
Ø Den kabellosen
Temperatursensor mit dem
Bedienfeld verbinden
Sollte Ihr Kochfeld nicht über einen kabellosen
Temperatursensor verfügen, können Sie diesen
nachträglich im Fachhandel oder über unseren
technischen Kundendienst unter Angabe der
Referenznummer HEZ39050 erwerben.
Um den kabellosen Temperarursensor mit dem
Bedienfeld zu verbinden, gehen Sie folgendermaßen
vor:
1. Grundeinstellung wählen ™‚…, siehe Kapitel
“Grundeinstellungen” in der Bedienungsanleitung.
Die Kochstellenanzeige leuchtet.
2. Die Kochstelle wählen, deren Anzeige aufleuchtet.
Ein Signal ertönt. Die Anzeige å leuchtet.
3. Innerhalb von 30 Sekunden das Symbol å auf
dem kabellosen Temperatursensor drücken.
Nach wenigen Sekunden erscheint in der Anzeige
der Kochstelle das Verbindungsergebnis des
Temperatursensors mit dem Bedienfeld.
Sobald der Temperatursensor fehlerfrei mit dem
Bedienfeld verbunden ist, stehen die Kochfunktionen
zur Verfügung.
Eine fehlerhafte Verbindung infolge einer Störung
des Temperatursensors kann aus folgenden
Gründen auftreten:
Bluetooth-Kommunikationsfehler.
Das Symbol am Temperatursensor wurde nicht
innerhalb von 30 Sekunden nach Auswahl der
Kochstelle gedrückt.
Die Batterie des Temperatursensors ist
verbraucht.
Kabellosen Temperatursensor zurücksetzen und den
Verbindungsvorgang erneut durchführen.
Bei einer fehlerhaften Verbindung infolge eines
Übertragungsfehlers den Verbindungsvorgang
erneut durchführen.
Ist die Verbindung weiterhin fehlerhaft , wenden Sie
sich an den technischen Kundendienst.
Kabellosen Temperatursensor zurücksetzen
1. Symbol å für ca. 8-10 Sekunden berühren.
Währenddessen leuchtet die LED-Anzeige des
Temperatursensors dreimal. Beim dritten
Aufleuchten der LED startet die Rücksetzung. In
diesem Moment den Finger vom Symbol nehmen.
Sobald die LED erlischt, ist der kabellose
Temperatursensor zurückgesetzt.
2. Verbindungsprozedur ab Punkt 2 wiederholen.
Ú Connecting the wireless
temperature sensor to the
control panel
If your hob does not have a wireless temperature
sensor, this can be purchased from specialist retailers
or through our technical after-sales service by quoting
the reference number HEZ39050.
To connect the wireless temperature sensor to the
control panel, follow the instructions below:
1. Select basic setting ™‚…; see the section entitled
"Basic settings" in the operating instructions.
The hotplate indicator will light up.
2. Select the hotplate and its indicator will light up. A
signal will sound. The å indicator will light up.
3. Press the å symbol on the wireless temperature
sensor within 30 seconds.
After a few seconds, the status of the connection
between the temperature sensor and the control
panel will appear on the hotplate's display.
The cooking functions are made available once the
temperature sensor has been connected to the
control panel correctly.
If there is a fault with the temperature sensor, the
connection may not be established correctly for the
following reasons:
Bluetooth communication error.
You did not press the symbol on the temperature
sensor within 30 seconds of selecting a hotplate.
The battery in the temperature sensor has run
out.
Reset the wireless temperature sensor and follow
the connection procedure once again.
If the temperature sensor and the control panel are
not connected correctly due to a transmission error,
follow the connection procedure once again.
If the display continues to show incorrect connection
, contact our technical after-sales service.
Resetting the wireless temperature sensor
1. Touch and hold the å symbol for approximately 8-
10 seconds.
While you are doing this, the temperature sensor's
LED indicator will light up three times. When the LED
lights up for the third time, it will start to reset the
temperature sensor. At this point, you will need to lift
your finger off the symbol.
Once the LED goes out, this means that the wireless
temperature sensor has been reset.
2. Repeat the connection procedure from point 2.
Ergebnis
Fehlerfreie Verbindung
Fehlerhafte Verbindung: aufgrund eines Übertragungsfehlers.
ƒFehlerhafte Verbindung: aufgrund eines Fehlers des Tempera-
tursensors.
Status
Connected correctly
Not connected correctly: Transmission error.
ƒNot connected correctly: Temperature sensor fault.
9001166682 - 02
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PXX995DX6E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PXX995DX6E in the language / languages: Dutch, Danish, French, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 0.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PXX995DX6E

Bosch PXX995DX6E Usermanual and installation guide - English - 164 pages

Bosch PXX995DX6E User Manual - English - 36 pages

Bosch PXX995DX6E User Manual - German - 36 pages

Bosch PXX995DX6E Usermanual and installation guide - Dutch - 164 pages

Bosch PXX995DX6E User Manual - Dutch - 64 pages

Bosch PXX995DX6E Usermanual and installation guide - Danish, French, Italian - 164 pages

Bosch PXX995DX6E User Manual - Italian - 64 pages

Bosch PXX995DX6E Usermanual and installation guide - Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info