110637
6
Zoom out
Zoom in
Previous page
1/28
Next page
6
Automatic calibration
The boiling temperature of water depends on the air pressure.
During calibration, the appliance is adapted to the pressure
conditions in the location where it is installed. This happens
automatically when you first use the appliance (see section:
First use). More steam develops than usual.
It is important that the appliance steams without interruption for
20 minutes at 100 °C. Do not open the appliance door during
this time.
If the appliance was not able to calibrate itself automatically (for
example, because the appliance door was opened), the
calibration process is carried out again during the next cooking
operation.
After moving house
So that the appliance automatically adjusts itself to its new
location, you must reset the appliance to the factory settings
(see section: Basic settings) and repeat the initial start-up
process (see section: First use).
After a power cut
The appliance saves the calibration settings even in the event
of a power cut or disconnection from the mains. Recalibration
is not necessary.
Before using the appliance for the first time
In this section you will find out which steps are required before
using the appliance for the first time:
Setting the clock and language
Setting the water hardness range
Starting the appliance for the first time
cleaning the accessories before use
Setting the clock and language
Once your new appliance has been connected to the mains,
“Set clock” appears in the display. Set the clock and the
language for the display, if required.
1.Press the X button to switch to the preset time.
2.Set the current time using the rotary selector.
3.Press the Y button to switch back to “Clock”.
4.Switch to “Select language” using the rotary selector.
5.Switch to “English” using the X button.
6.Set the required language using the rotary selector.
There is a choice of 30 different languages.
7.Press the 0 button.
The time and language are applied. The current time is
displayed.
Setting the water hardness range
Descale your appliance regularly. This is the only way to
prevent damage.
Your appliance automatically displays when it needs descaling.
It has been preset to water hardness range "medium". Change
the value if your water is softer or harder.
You can check the water hardness with the test strips supplied
or ask your water supplier.
If your water is very hard, we recommend that you use softened
water.
You can only dispense with descaling completely if you
exclusively use softened water. If this is the case, change the
water hardness to "softened".
You can change the water hardness range in the basic settings
when the appliance is switched off.
1.If required, press the % button to switch off the appliance.
2.Press and hold the ° button until "Select language" appears in
the display.
3.Turn the rotary selector until "Water hardness range" appears.
4.Press the X button.
"2-medium" is highlighted in the display.
5.Change the water hardness range using the rotary selector.
Possible values:
6.Press the ° button to exit the basic settings.
The change is saved.
Before first use
Before using the appliance for the first time, heat it up while still
empty in the “Steam” type of heating to 100 °C for 20 minutes.
Do not open the appliance door during this time. The appliance
is automatically calibrated (see section: Automatic calibration).
1.Press the % button to switch on the appliance.
After approx. 4 seconds, the “Steam” type of heating
appears.
2.Fill and insert the water tank (see section: Filling the water
tank).
Before using for the first time, moisten the seal in the tank
cover with a little water.
Cooking container, solid, GN
Y, 40 mm
deep
HEZ36D153
Cooking container, perforated, GN
Y,
40 mm deep
HEZ36D153G
Wire rack HEZ36DR
Cleaning sponge 643 254
Descaler 311 138
Honeycomb microfibre cloth 460 770
Accessories Order no.

2EHU8QWHUKLW]H
&

8KU]HLWHLQVWHOOHQ
8KU]HLW

PLWVFKOLHHQ
softened -
1-soft I
2-medium II
3-hard III
4very hard IV
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch HBC 26D553 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch HBC 26D553 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch HBC 26D553

Bosch HBC 26D553 User Manual - German - 28 pages

Bosch HBC 26D553 User Manual - Dutch - 28 pages

Bosch HBC 26D553 User Manual - Dutch - 72 pages

Bosch HBC 26D553 User Manual - Danish - 28 pages

Bosch HBC 26D553 User Manual - French - 28 pages

Bosch HBC 26D553 User Manual - Italian - 28 pages

Bosch HBC 26D553 User Manual - Polish - 32 pages

Bosch HBC 26D553 User Manual - Portuguese - 28 pages

Bosch HBC 26D553 User Manual - Swedish - 28 pages

Bosch HBC 26D553 User Manual - Turkish - 28 pages

Bosch HBC 26D553 User Manual - Spanish - 28 pages

Bosch HBC 26D553 User Manual - Norwegian - 28 pages

Bosch HBC 26D553 User Manual - Finnish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info