539168
3
Zoom out
Zoom in
Previous page
1/20
Next page
Video Recorder 670 Series Quick install
Bosch Security Systems v2.0 | 2012.03
Quick install
To get the unit quickly operational, make the connections
described below and then enter the relevant data in the Quick
install menu. The Quick install menu appears the first time the
unit is started.
Connections
Primary connections
1. Connect the cameras to the VIDEO IN BNC connectors
(automatically terminated).
2. Connect monitor A to the VGA MON A output supporting
800x600 (4:3), 1024x768 (4:3), or 1280x1024 (5:4),
1366x768 (16:9) and 1440x900 (16:10).
3. Connect USB mouse to a USB port.
Optional connections
1. Connect monitor B to the HDMI (or CVBS) MON B
connector (supporting 800x600).
2. Connect up to 4 audio signals to the AUDIO IN RCA
(CINCH) inputs.
3. Connect 2 AUDIO OUT RCA (CINCH) outputs to the
monitor or an audio amplifier.
4. Connect up to 8/16 ALARM IN inputs (via the supplied
terminal blocks).
5. Connect up to 4 ALARM OUT outputs (via the supplied
terminal blocks).
6. Connect a pan/tilt/zoom control unit to the RS-485 or
RS-232 port.
7. Connect to your network via the Ethernet port.
8. Connect a Bosch Intuikey keyboard cable to the
Keyboard-IN port if required.
Powering up
Switch on all connected equipment.
Connect the power unit to the AC power outlet.
Connect the DC power cord to the 12VDC connector on
the unit.
First-time use
The Quick install menu opens the first time the unit is used. Fill
in the basic settings in the three tabs to get the unit
operational. The unit begins recording automatically when the
Quick install menu is closed.
Navigating
Use the supplied USB mouse. Alternatively, use the following
front panel keys:
Use the enter key to select a submenu or item.
Use the arrow keys to
move through a menu or list.
Use the exit key to go back or to switch off the
menu.
After bootup, the unit presents the log in screen over a quad
display. The default User ID is ADMINISTRATOR, the default
password is 000000 (six zeros).
Switching monitors
To switch the monitor A output to the HDMI connector:
1. Remove power from the DVR.
2. Press and hold the multiscreen key on the front
panel.
3. Supply power to the unit.
The unit starts with monitor A on the HDMI
connector and monitor B on the VGA connector.
To switch the monitor A output to the VGA connector:
1. Remove power from the DVR.
2. Press and hold the quad key on the front panel.
3. Supply power to the unit.
The unit starts with monitor A on the VGA
connector and monitor B on the HDMI connector.
Quick install menu
The Quick install menu contains three tabs: International,
Continuous Recording, and Network. Click the Exit button to
exit the Quick install menu. Changing Quick install settings
overwrites customized settings.
International
Continuous Recording
Set the Continuous Recording Resolution, Quality, Frame rate,
Covert, and Audio for each profile in the table.
Network
Language Select the language for the menu from the list.
Time zone Select a time zone from the list.
Time
format
Select either a 12 or a 24 hour clock format.
Time Fill in the current time.
Date
format
Select from three date formats which show
either the month (MM), the day (DD), or the
year (YYYY) first.
Date Fill in the current date.
DVR ID Enter a unique DVR name to be used in the
network.
DHCP Enable DHCP to have IP address, subnet
mask, and default gateway assigned
automatically by the network server.
The actual values are displayed.
IP address,
Subnet mask,
and Gateway
Fill in the IP, subnet mask, gateway
addresses, and DNS server addresses when
DHCP is not enabled.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch DVR 670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DVR 670 in the language / languages: English as an attachment in your email.

The manual is 4,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch DVR 670

Bosch DVR 670 User Manual - English - 100 pages

Bosch DVR 670 User Manual - German - 108 pages

Bosch DVR 670 User Manual - Dutch - 104 pages

Bosch DVR 670 User Manual - French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info