Manual Bosch ART 23 COMBITRIM (page 19 of 194) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

537958

Zoom out

Zoom in

1/194

English - 5

Place the Extra Strong Line spool 14 on the spool

plate in the correct position (bayonet fastening),

press down and turn fully clockwise (click).

When the Extra Strong Line breaks, us the

above procedure to remove the spool and fit the Ex-

tra Strong replacement Line 13 as shown to the

spool.

Replacement Extra Strong Line can be stored on the

product as shown in main figure.

Refilling Line

Take out the spool 25 as described above.

Press the cover ring 27 together, push it forward and

detach over the smaller diameter of the spool.

Cut off approx. 8 m line from the refill roll. Press one

end into the notch of the spool so that it stands out

approx. 4 mm.

Wind on the line tightly and in orderly layers in arrow

direction.

Thread the line’s end through the slot 26 in the cover

ring 27 from the inside.

Keep the line tight and slide the cover ring 27 over

the smaller diameter of the spool.

Build in the spool as described above.

Note: Only use Bosch replacement line. It has been

developed specially for improved cutting and feed-

ing performance. The use of other line will lead to a

deterioration in performance.

Stop and remove plug from the power sup-

ply.

Clean the exterior of the machine thoroughly using a

soft brush and cloth. Do not use water, solvents or

polishes. Remove all grass and debris, especially

from the ventilation slots 8.

Turn the machine on its side and clean the cutting

guard 10 inside. If grass cuttings are compacted, re-

move with a wooden or plastic implement.

Hang the cable on the hook provided. DO NOT

wrap/loop the supply/extension cable around the

hook and the guard together – this will cause the ca-

ble to be in contact with the guard blade which can

damage the cable. ONLY hang the cable on the

hook provided.

The following table gives checks and actions that you can perform if your machine does not operate correctly.

If these do not identify/remedy the problem, contact your service agent.

Warning: Switch off and remove plug from mains before investigating fault.

After Trimming/Storage

Fault Finding

Symptom Possible Cause Remedy

Machine fails to operate Power turned off

Mains socket faulty

Extension cable damaged

Fuse faulty/blown

Turn power on

Use another socket

Inspect cable, replace if damaged

Replace fuse

Machine functions

intermittently

Extension cable damaged

Machines internal wiring damaged

Inspect cable, replace if damaged

Contact Service Agent

Machine labours Grass too high Cut in stages

Machine is not cutting Line too short/broken off Feed the line manually/automatically

Line can not be fed Spool empty

Line inside the spool entangled

Replace the spool

Inspect the spool, rewind if necessary

Line keeps breaking Line inside the spool entangled

Trimmer used incorrectly

Inspect the spool, rewind if necessary

Only trim with the tip of the line, avoid

stones, walls and other hard objects.

Feed the line regularly to maintain full

cutting width.

F 016 L70 621.book Seite 5 Montag, 30. November 2009 3:03 15

19 • F 016 L70 621 • 09.11

I've read instructions and manual and watched videos. None of them explains how to open the red round thing which holds the cutting wire to replace it. They seem to assume it's easy to twist it. It isn't! Has anybody any ideas? Submitted on 10-6-2023 at 17:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ART 23 COMBITRIM in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch ART 23 COMBITRIM Manual

Product: