697423
4
Zoom out
Zoom in
Previous page
1/28
Next page
4 | Information on the solar pump station
AGS10-2, AGS10E-2, AGS20-2, AGS50-26 720 811 270 (2015/04)
2.1.1 Specifications and variants
2.1.2 Energy efficiency
The following product data complies with the requirements of
EU Regulations 811/2013, 812/2013, 813/2013 and 814/2013 as
supplement to the Directive 2010/30/EU.
2.1.3 Solar system and additional heat sources
It is often possible to attach multiple heat sources to combi and buffer
cylinders. These heat sources can completely heat the contents of the
cylinder to over 80 °C.
AGS10-2 AGS10E-2
Maximum possible temperature °C Flow: 130 / return: 110 (pump)
Safety valve response pressure bar 66
Pressure relief valve DN 15, ¾ " connection DN 15, ¾ " connection
Mains voltage 230V AC, 50 - 60 Hz 230V AC, 50 - 60 Hz
Maximum current consumption per pump A 0,4 A / EEI 0,2 0,4 A / EEI 0,2
Measurements (height x width x depth) mm 353x284x248 355x185x180
Flow and return connections
(compression fittings)
mm 15 / 22 15 / 22
Table 2 Specifications of AGS10-2 and AGS10E-2
AGS20-2 AGS50-2
Maximum possible temperature °C Flow: 130 / return: 110 (pump)
Safety valve response pressure bar 66
Pressure relief valve DN 15, ¾ " connection DN 20, 1" connection
Mains voltage 230V AC, 50 - 60 Hz 230V AC, 50 - 60 Hz
Maximum current consumption per pump A 0,7 A / EEI 0,2 1,0 A / EEI 0,23
Measurements (height x width x depth) mm 353x284x248 403x284x248
Flow and return connections
(compression fittings)
mm 22 28
Table 3 Specifications of AGS20-2 and AGS50-2
AGS10-2 AGS10E-2 AGS20 AGS50
Power
consumption
standby (W)
solstandby
W 2.00 2.00 2.00 2.50
Power
consumption full
load (W)
solpump
1)
1) 50 % of nominal power input in operation at 72 mbar and 50 l/h.
W 15 15 22.5 50
Table 4
WARNING: Risk of injury from hot fluid leaks.
To avoid blocking the path to the safety equipment,
leave the ball valves of the solar pump station open
during operation.
If required, install an additional item of safety
equipment between the cylinder and the solar pump
station.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AGS10-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AGS10-2 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info