555125
7
Zoom out
Zoom in
Previous page
1/54
Next page
7
If for any reason the old plug is cut off the cord of
this tool, it must be disposed of safely and not left unat-
tended
Your machine is double insulated in accord-
ance with EN 50144; therefore no earthwire
is required.
MAINTENANCE
Make sure that the machine is not live when
carrying out maintenance work on the motor.
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt.If the dirt does not come off use a soft
cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These sol-
vents may damage the plastic parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please
contact your local SBM Group dealer.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations. Take
your unwanted machines to your local SBM Group
dealer. Here they will be disposed of in an environmen-
tally safe way.
Winkelschleifer
EINLEITUNG
Dieses Werkzeug ist für das Schruppen, Trennen und
Entgraten von Metall- und Steinwerkstoffen ohne Zuhil-
fenahme von Wasser bestimmt; mit geeignetem Zube-
hör kann das Werkzeug auch für das Anschleifen und
Schleifen benutzt werden
TECHNISCHE DATEN 1
WERKZEUG-ELEMENTE 2
1. Spindel
2. Spann ansch
3. Spannschlüssel
4. Spindelarretierungsknopf
5. Seitengriff
6
. Schutzhaube
7
. Befestigungs ansch
8
. Ein-/Aus Arretierungsschalter
SICHERHEIT
ACHTUNG! Sämtliche Anweisungen sind zu lesen.
Fehler bei der Einhaltung der nachstehend aufgeführ-
ten Anweisungen können elektrischen Schlag, Brand
und/oder schwere Verletzungen verursachen.
• Dieses Werkzeug nur zum Trockenschruppen/-tren-
nen verwenden
• Nur die mit diesem Werkzeug mitgelieferten Flansche
verwenden
Der Benutzer dieses Werkzeuges sollte älter als 16
Jahre sein
Ziehen Sie grundsätzlich den Netzstecker, bevor Sie
beliebige Änderungen an den Einstellungen oder einen
Zubehörwechsel vornehmen
ZUBEHÖR
Benutzen Sie das Original-Zubehör, welches bei un-
seren Fachhändlern oder den SBM GROUP-Vertrags-
werkstätten erhältlich ist
Bei Verwendung von Fremdfabrikaten beim Zubehör
bitte die Hinweise des Herstellers beachten
Nur Zubehör verwenden, dessen zulässige Drehzahl
mindestens so hoch ist wie die höchste Leerlaufdreh-
zahl des Werkzeuges
Rissige, verformte oder vibrierende Schrupp-/Trenn-
scheiben dürfen nicht verwendet werden
Mit Schrupp-/Trennscheiben soll vorsichtig umgegan-
gen werden, zur Vermeidung von Splittern oder Rissen
Zubehör ist vor Stoß-, Schlag- und Fetteinwirkung zu
schützen
• Eine Schrupp-/Trennscheibe, die größer ist als das
maximal empfohlene Ausmaß, darf nicht verwendet
werden
• Verwenden Sie nur Schrupp-/Trennscheiben mit ei-
nem Lochdurchmesser, der spielfrei zu Flansch (7)
paßt; verwenden Sie niemals Reduktionsstücke oder
Adapter, um Schrupp-/Trennscheiben mit einem größe-
ren Loch passend zu machen
DE
Deutsch
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bort BWS-1100N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bort BWS-1100N in the language / languages: All languages as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info