665044
5
Zoom out
Zoom in
Previous page
1/52
Next page
5
GB
NACH DER ANWENDUNG
Nach dem Ausschalten des Werkzeuges dreht sich
das Zubehör noch einige Sekunden weiter
Sobald Sie sich von Ihrem Werkzeug entfernen,
sollte dieses ausgeschaltet werden und sollten die
sich bewegenden Teile vollkommen zum Stillstand
gekommen sein
Zubehör darf nach dem Ausschalten des Werkzeugs
nicht durch Gegendrücken gebremst werden
• Lagern Sie das Werkzeug nicht bei Temperaturen
über 50°C
Die Maschine ist nach EN50144 doppeliso-
liert; daher ist Erdung nicht erforderlich.
WARTUNG
Trennen Sie die Maschine vom Netz, wenn
Sie am Mechanismus Wartungsarbeiten aus-
führen müssen.
Die Maschinen von SBM Group sind entworfen, um
während einer langen Zeit problemlos und mit mini-
maler Wartung zu funktionieren. Sie Verlängern die
Lebensdauer, indem Sie die Maschine regelmäßig rei-
nigen und fachgerecht behandeln.
Reinigen Sie das Maschinengehäuse regelmäßig mit
einem weichen Tuch, vorzugsweise nach jedem Ein-
satz. Halten Sie die Lüfterschlitze frei von Staub und
Schmutz. Entfernen Sie hartnäckigen Schmutz mit
einem weichen Tuch, angefeuchtet mit Seifen wasser.
Verwenden Sie keine Lösungsmittel wie Benzin, Alko-
hol, Ammonia, usw. Derartige Stoffe beschädigen die
Kunststoffteile.
Die Maschine braucht keine zusätzliche Schmierung.
Wenden Sie sich in Störungsfällen, z.B. durch Ver-
schleiß eines Teils, an Ihren örtlichen SBM Group-
Vertragshändler.
UMWELT
Um Transportschäden zu verhinderen, wird die Ma-
schine in einer soliden Verpackung geliefert. Die Ver-
packung besteht weitgehend aus verwertbarem Mate-
rial. Benutzen Sie also die Möglichkeit zum Recyclen
der Verpackung. Bringen Sie bei Ersatz die alten Ma-
schinen zu Ihren örtlichen SBM Group-Vertagshändler.
Er wird sich um eine umweltfreundliche Verarbeitung
ïhrer alten Maschine bemühen.
Die grinder
INTENDED USE
This tool is intended for high-precision grinding, sand-
ing, cutting, engraving, polishing and drilling in different
materials
TECHNICAL SPECIFICATIONS
1
PRODUCT ELEMENTS 2
1. On/off switch
2. Spindle-lock button
3. Collet
4. Collet nut
5. Speed selection wheel
SAFETY
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock,
re and/or serious injury.
• This tool should not be used by people under the
age of 16 years
Only use this tool for applications without the use of
water
Always disconnect plug from power source before
making any adjustment or changing any accessory
ACCESSORIES
SBM Group can assure awless functioning of the
tool only when original accessories are used
• Use only accessories recommended by SBM
Group
For mounting/using non-SBM Group accessories
observe the instructions of the manufacturer con-
cerned
Use only accessories with an allowable speed
matching at least the highest no-load speed of the
tool
Do not use damaged, deformed or vibrating acces-
sories
Handle and store grinding/cutting discs carefully to
avoid chipping and cracking
Protect accessories from impact, shock and grease
Never use grinding discs over 32 mm (1 1/4”) Ø
Never use drill bits over 3.2 mm (1/8”) Ø
Never use a cutting disc for side grinding
Never use reducors or adaptors to t large-hole
grinding/ cutting discs
English
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bort BCT-140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bort BCT-140 in the language / languages: All languages as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info