534006
136
Zoom out
Zoom in
Previous page
1/140
Next page
66
Failure codes and what to do in case
of failure
If the programme won’t start
• Check if the plug is connected.
• Check your indoor fuses.
• Be sure that the water inlet tap is turned on.
Be sure that you have closed the machine
door.
Be sure that you switched off the machine by
pressing the Power On / Off button.
Be sure that the water inlet lter and the
machine filters are not clogged.
If detergent residues are left in the detergent
compartment
Detergent has been added when the detergent
compartment was wet.
If water is left inside the machine at the end of
the programme
• The water drain hose is clogged or twisted.
• The lters are clogged.
• The programme is not nished yet.
If the machine stops during a wash operation
• Power failure.
• Water inlet failure.
• Program can be on standby mode.
If shaking and hitting noises are heard during a
wash operation
• Dishes placed incorrectly.
• Spray arm hitting the dishes.
ERROR CODE ERROR DESCRIPTION CONTROL
F5 Inadequate water supply Make sure the water input tap is totally open and that
there is no water cut.
Close the water input tap, separate the water input
hose from the tap and clean the filter at the connection
end of the hose.
Restart your machine, contact the service if the error
resumes.
F3 Error of continuous water input Close the tap.
• Contact the service.
F2 The waste water in the
machine cannot be discharged.
• Water discharge hose is clogged.
• The lters of your machine might be clogged.
Power off-on your machine and activate the program
cancellation command.
• If the error continues, contact the service.
F8 Heater error Contact the service.
F1 Alarm is active against water
overflow
• Power off your machine and close the tap.
• Contact the service.
FE Faulty electronic card • Contact the service.
F7 Overheating error (tempera-
ture in the machine is too high)
• Contact the service.
F9 Divisor position error • Contact the service.
F6 Faulty heater sensor • Contact the service.
136


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti BVW-682 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BVW-682 in the language / languages: Dutch, French as an attachment in your email.

The manual is 7,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info