Manual Boretti BIKW-76 (page 65 of 68) (English, German, Dutch, French)

647506

Zoom out

Zoom in

1/68

Installation instructions

The installation comes under the exclusive res-

ponsibility of specialists. The installer is held

to respect the legislation and the standards

enforce in his home country.

How to stick the gasket:

The gasket supplied with the hob avoids all inﬁl-

tration of liquids in the cabinet.

His installation has to be done carelessly, in

conformity of the following drawing. Stick the gasket (2) two millimeters from the

external edge of the glass, after removing the

protection sheet (3).

2 mm

Fitting - installing:

The cut-out sizes for the hobs are:

• Ensure that there is a distance of 50 mm bet-

ween the hob and the wall or sides.

• The hobs are classied as “Y” class for heat

protection. Ideally the hob should be instal-

led with plenty of space on either side. There

may be a wall at the rear and tall units or a

wall at one side. On the other side, however,

no unit or divider must stand higher than the

hob.

• The piece of furniture or the support in which

the hob is to be ﬁtted, as well as the edges

of furniture, the laminate coatings and the

glue used to x them, must be able to resist

temperatures of up to 100 °C.

• The mural rods of edge must be heat-resi-

sting.

• Not to install the hob to the top of a not ven-

tilated oven or a dishwasher.

• To guarantee under the bottom of the hob

casing a space of 20 mm to ensure a good air

circulation of the electronic device.

• If a drawer is placed under the work, avoid

to put into this drawer ﬂammable objects

(for example: sprays) or not heat-resistant

objects.

• Materials which are often used to make

worktops expand on contact with water. To

protect the cut out edge, apply a coat of var-

nish or special sealant. Particular care must

be given to applying the adhesive joint sup-

plied with the hob to prevent any leakage into

the supporting furniture. This gasket guaran-

ties a correct seal when used in conjunction

with smooth work top surfaces.

• The safety gap between the hob and the

cooker hood placed above must respect the

indications of the hood manufacturer. In case

of absence of instructions respect a distance

minimum of 760 mm.

• The connection cord should be subjected, af-

ter building, with no mechanical constraint,

such for example of the fact of the drawer.

Apparaat Cut-size

BIKW-76 765 x 495 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BIKW-76 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti BIKW-76 Manual

Product: