Manual Boretti BIK38 (page 62 of 66) (English, German, Dutch, French)

533767

Zoom out

Zoom in

1/66

Installation instructions

The installation comes under the exclusive res-

ponsibility of specialists.

The installer is held to respect the local legisla-

tion and standards.

How to ﬁx the gasket:

The gasket supplied with the hob avoids all inl-

tration of liquids in the cabinet.

This installation has to be done carefully, in

conformity of the following drawing.

Stick the gasket (2) two millimetres from the

external edge of the glass, after removing the

protection sheet (3).

2 mm

Fitting - installing:

• The cut out sizes are:

• Ensure that there is a distance of 50 mm

between the hob and the wall or sides.

• The hobs are classied as “Y” class for heat

protection. Ideally the hob should be instal-

led with plenty of space on either side. There

may be a wall at the rear and tall units or a

wall at one side. On the other side, however,

no unit or divider must stand higher than the

hob.

• The piece of furniture or the support in which

the hob is to be tted, as well as the edges

of furniture, laminate coatings and the glue

used to x them, must be able to resist tem-

peratures of up to 100 °C.

• The mural rods or edge must be heat-resi-

sting.

• Do not install the hob above a non ventilated

oven or dishwasher.

• Ensure a space under the bottom of the hob

casing of 20 mm to ensure a good air circu-

lation of the electronic device.

• If a drawer is placed under the hob, avoid

placing ﬂammable objects in this drawer

(for example: sprays) or non heat-resistant

objects.

• To protect the cut out edge, apply a coat of

varnish or special sealant. Particular care

must be given to applying the adhesive joint

supplied with the hob to prevent any leakage

into the supporting furniture. This gasket

guarantees a correct seal when used in con-

junction with smooth work top surfaces.

• The safety gap between the hob and the coo-

ker hood placed above must respect the indi-

cations of the hood manufacturer. In case of

absence of instructions respect a distance

minimum of 760 mm.

• The connection cord should be free of (me-

chanical) constraints after installation, at all

times.

Reference Worktop cut-out (mm)

Width x Depth

BIK-38 350 x 490

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BIK38 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti BIK38 Manual

Product: