533807
37
Zoom out
Zoom in
Previous page
1/42
Next page
NL
FR
D
EN
37
repeat step 3.
5. Adjust the heat by turning the needle valve
to the High /Low position.
6. To turn the barbecue ‘OFF’ turn the cylinder
valve or regulator switch to the ‘OFFposi-
tion and then turn the needle valve on the
appliance clockwise to the ‘OFF’ position.
Warning: If the burner fails to ignite, turn the
control knob off (clockwise) and also turn the
cylinder valve off. Wait five minutes before at-
tempting to relight with ignition sequence.
Before cooking for the first time, operate the
barbecue for about 15 minutes with the lid
closed and the gas turned on HIGH. This will
“heat clean” the internal parts and dissipate
odour from the painted finish.
Clean your barbecue after each USE.
DO NOT use abrasive or flammable cleaners,
as it will damage the parts of the product and
may start a fire.
Clean in warm soapy water.
WARNING: Accessible parts may be very hot.
Keep young children away from the hot appli-
ance at all times (even while cooling down!). It
is recommended that protective gloves (e.g.
oven gloves) be used when handling particularly
hot components.
Cleaning and care
CAUTION: AII cleaning and maintenance should
be carried out when the barbecue is cool and
with the fuel supply turned OFF at the gas cyl-
inder.
Cleaning
“Burning off” the barbecue after every use (for
approx 15 minutes) will keep excessive food
residue to a minimum.
Outside surface
Use mild detergent or baking soda and hot
water solution. Non-abrasive scouring powder
can be used on stubborn stains, then rinse with
water. If the inside surface of the barbecue lid
has the appearance of pealing paint, baked on
grease build-up has turned to carbon and is
flaking off. Clean thoroughly with strong hot
soapy water solution. Rinse with water and al-
low to completely dry.
NEVER USE OVEN CLEANER.
Interior of barbecue bottom
Remove residue using brush, scraper and/or
cleaning pad then wash with a soapy water so-
lution. Rinse with water and allow to dry.
Cooking grid
Use a mild soapy water solution. Non-abrasive
scouring power can be used on stubborn stains
then rinse with water.
Cleaning the burner assembly
Turn the gas OFF at the control knob and dis-
connect the cylinder.
Remove cooling grate.
Clean the burner with a soft brush or blow clean
with compressed air and wipe with a cloth.
Clean any clogged ports with a pipe cleaner or
stiff wire (such as an opened paper clip).
Inspect burner for any damage (cracks or
holes). If damage is found, replace with a new
burner. Reinstall the burner, check to ensure
that the Gas valve orifices are correctly po-
sitioned and secured inside the burner inlet
(venturi).
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti BAMBINO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BAMBINO in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info