552034
14
Zoom out
Zoom in
Previous page
1/14
Next page
14
06/2012
- Close the tap.
- If the water inlet hose is frozen, wrap the hose connection with a hot-towel.
- Remove the inlet hose and soak it in warm water.
- Full fill the drum with 2-3 l of warm water.
- Wait a few minutes, until the water has melted, then plug the cord in and select the program 'spin'
and restart the machine.
- Make sure in future that the room temperature is above 0°C.
Repairs
CAUTION
Servicing of electric devices must be conducted by qualified experts only. Incorrect or improper repairs
constitute a risk for the user and will void the warranty!
What if . . . Troubleshooting
Certain problems are due to lack of simple maintenance or oversights. Before contacting your local
Service-Centre, please carry out the checks listed below.
Problem
Possible Cause
Solutions
No water inlet
(Error code E1)
- Is the water tap open or not enough
water pressure?
- Is the drain hose plugged in?
- Is the sensor defective or is a hose
leaking?
- The drain valve is defective.
- The circuit board is defective.
- Check the tap and the water pres-
sure.
- Install the drain hose.
- Check the water sensor and the
hose, change if necessary.
- Contact a specialist.
- Contact a specialist.
Door lock alarm
(Error code E2)
- Is the door properly closed?
- Is the laundry caught between door
and seal?
- The door lock is damaged.
- The circuit board is defective.
- Close the door well.
- Pull the laundry into the drum.
- Contact a specialist.
- Contact a specialist.
No water outlet
(Error code E3)
- Is the filter clogged?
- Is the drain hose clogged or kinked.
- The valve is defective.
- Is the plug connected correctly or is
it a line fault?
- The water sensor is defective.
- The circuit board is defective.
- Clean the filter.
- Clean and check the hose.
- Contact a specialist.
- Check the plug or contact a spe-
cialist.
- Contact a specialist.
- Contact a specialist.
Water overflow /
water sensor
(Error code E4)
- The inlet valve is defective.
- Are the hoses connected correctly?
- The water sensor is defective.
- The circuit board is defective.
- Contact a specialist.
- Check the hose connections.
- Contact a specialist.
- Contact a specialist.
The motor does not
work
(Error code E5)
- The connection between the motor
and wire is not secure.
- The motor is over-heated.
- The motor is defective.
- The circuit board is defective.
- Contact a specialist.
Problem with
heating element
(Error code E6)
- The connection of the heating is
wrong or defective.
- The heating element is defective.
- The circuit board is defective.
- Contact a specialist.
Temperature sen-
sor fault
(Error Code E7)
- The connection of the temperature
sensor is wrong or defective.
- The sensor is defective.
- The circuit board is defective.
- Contact a specialist.
Are you interested in other Bomann products? Please visit our website:
www.bomann.de
Distribution: C. Bomann GmbH • Heinrich-Horten-Str. 17 • D-47906 Kempen
14


Need help? Post your question in this forum.

Forumrules
1

Forum

bomann-wa-5612

Reset search

  • Was washing and sadly the machine stoped n the power went off for days it still won’t start Submitted on 17-1-2022 at 22:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann WA 5612 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann WA 5612 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann WA 5612

Bomann WA 5612 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info