651960
33
Zoom out
Zoom in
Previous page
1/58
Next page
33
MS479CB_Instruction Manual_new 01.07.16
Fill your latte macchiato glass with the warm milk and milk
foam. Then add the espresso. We recommend a proportion
of 2/3 milk and 1/3 frothed milk and 1 cup of espresso.
Caffè Latte
Use the stirrer to foam (8) the milk and prepare a small
quantity of hot milk as described in the Chapter "Instructions
for Operation".
Cover a double espresso in a large cup of hot milk with a
little froth.
Cold drinks:
Cappuccino Freddo
Use the stirrer to foam (8) the milk for a cappuccino freddo
and prepare cold frothed milk as described in "Instructions
for Operation".
Fill your cappuccino cup rst with espresso and then add
milk foam and cold milk. We recommend a proportion of
1/3 espresso, 1/3 milk froth and 1/3 milk.
Cleaning
WARNING:
Unplug the power plug before cleaning (6).
Never immerse the motor/heating unit (4) into water. It could result
in an electric shock or re.
CAUTION:
Do not immerse the appliance in water: the electronic
components can be damaged.
Do not use a wire brush or any abrasive items.
Do not clean in the dishwasher.
Motor/heating unit (4)
To clean the outside of the motor/heating unit (4), use only
a damp dishcloth with a little dishwasher detergent.
Stirrer (8 or 9) and foam tank (2)
The stirrer (8 or 9) and the foam tank (2) can be cleaned
in soapy water.
Let the components dry well before reassembly.
Troubleshooting
Problem Cause Solution
The appliance
does not turn
on or stops
operating.
Appliance without
power supply.
- Check the out-
let with another
appliance.
- Insert mains
plug (6).
- Check the
house fuse.
The foam con-
tainer (2) was not
set properly on
the motor/heating
unit (4).
Set the foam tank
(2) correctly on
the motor/heating
unit (4) so that the
safety switch is
depressed.
Problem Cause Solution
The device is too
hot. Overheating
protection is
activated.
Allow the appli-
ance to cool.
Appliance
defective.
Contact our
service center or
a specialist.
The milk foams a
little or not at all.
The milk is too
hot.
Use milk at
refrigerator
temperature.
The stirrer for
making foam (8)
was not used.
Insert the stirrer
for creating foam
(8) and prepare
the milk again.
The load capacity
is exceeded.
Fill the tank up to
the MIN level.
Milk escaping
from the lid.
The load capacity
is too large.
Reduce the load
capacity.
The LEDs ash
when apparatus is
switched on.
The device was
turned on without
a properly insert-
ed foam tank (2).
Insert the foam
tank (2) on the
motor/heating unit
(4) and turn on
the unit again.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann MS 479 CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann MS 479 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info