651960
32
Zoom out
Zoom in
Previous page
1/58
Next page
32
MS479CB_Instruction Manual_new 01.07.16
- in staff kitchens of shops, ofces and other commercial areas.
It is not designed for use
- by visitors in hotels, motels and other residential facilities;
- on agricultural property;
- in bed and breakfast type environments.
Overview of the Components
1 Cover
2 Foam tank
3 Hot plate with safety switch
4 Motor/heating unit
5 Power cord
6 Reheat button with red LED
7 Cold button with blue LED
8 Stirrer for frothing milk
9 Stirrer for hot drinks without foaming
Preparation
Remove the appliance and all included accessories from
the box.
In order to remove any production residue, clean all acces-
sories before initial use as described in “Cleaning”.
Place the device on a stable, at and dry surface.
Electrical Connection
Check if the mains voltage to be applied matches the
voltage of the appliance. Refer to the rating label for
detailed specications.
The redundant length of the connecting cable can be
wound up at the bottom of the motor/heating unit. Connect
the power cord into a grounded outlet (If foam tank (2) is
not attached the LEDs in both buttons ash (6 and 7)).
Instructions for Operation
1. Open the lid (1): Pull the cover (1) upwards from the
foam tanks (2).
2. Insertion of a stirrer: At the bottom of the tank (2) you
see the axle of the stirrer (8 or 9). Insert the stirrer (8 or 9)
on the axle and check to make sure it can rotate freely.
3. Filling the foam tank (2): Fill the desired quantity of milk
or a hot drink in the foam tank (2). Note the corresponding
MIN and MAX markers in the foam tank (2) (lower MAX
marking for frothing milk, upper MAX marker for drinks
without foam).
4. Function selection:
Function Button Stirrer
Frothing cold milk
Stirrer (8) for
frothing
Frothing hot milk
Stirrer (8) for
frothing
Warm milk or
cocoa (without
foaming)
Stirrer (9) for hot
drinks without
foaming
5. The selected button is lit continuously while the stirrer
(8 or 9) stirs drinks or foams. After about 2 minutes, the
device switches off automatically and the respective
button ashes about 8 times.
NOTE:
If the foam tank (2) has been lifted from the motor/heating
unit (4), the LEDs in the two buttons (6 and 7) blink.
Finish the operation and empty the foam tank (2)
Turn off the illuminated button and unplug the power cord
(6).
Wait until the stirrer (8 or 9) has come to a standstill.
Remove the foam tank (2) from the motor/heating unit (4)
and pour the contents into a cup or into coffee.
Clean all used components as described in Chapter
“Cleaning”.
Recipes
Hot drinks:
Cappuccino
Use the stirrer to foam (8) the milk for a cappuccino and
prepare hot frothed milk as described in the Chapter
"Instructions for Operation".
Fill your cappuccino cup rst with espresso and then add
milk foam and cold milk. We recommend a proportion of
1/3 espresso to 2/3 milk froth.
Latte Macchiato
Use the stirrer to foam (8) the milk for a latte macchiato
and prepare hot frothed milk as described in the Chapter
"Instructions for Operation".
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann MS 479 CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann MS 479 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info