552047
19
Zoom out
Zoom in
Previous page
1/20
Next page
19
12/2011
Problem
Possible Causes
What To Do
Cloudiness on
glassware
Combination of soft water
and too much detergent
Use less detergent if you have soft water and select a shortest
cycle to wash the glassware and to get them clean.
Yellow or brown film
on inside surfaces
Tea or coffee stains
Using a solution of 1/2 cup of bleach and 3 cups of warm water to
remove the stains by hand.
You have to wait for 20 minutes after a cycle to let the heating
elements cool down before cleaning interior; otherwise, burns will
happen.
Iron deposits in water can
cause an overall film
You have to call a water softener company for a special filter.
White film on inside
surface
Hard water minerals
To clean the interior; use a damp sponge with dishwasher deter-
gent and wear rubber gloves. Never use any other cleaner than
dishwasher detergent for the risk of foaming or suds.
The detergent dis-
penser lid cannot be
closed properly
Clogged detergent residue
is blocking the catch
Clean the detergent from the catch.
Detergent left in
dispenser cups
Dishes block detergent
Cups
Re-loading the dishes properly.
Steam Normal phenomenon
There is some steam coming through the vent by the door latch
during drying and water draining.
Black or gray marks
on dishes
Aluminum utensils have
rubbed against dishes
Use a mild abrasive cleaner to eliminate those marks.
Water standing on
the bottom of the tub
This is normal
A small amount of clean water around the outlet on the tub bot-
tom keeps the water seal lubricated.
Dishwasher leaks
Overfill dispenser or rinse
aid spills
Be careful not to overfill the rinse aid dispenser. Spilled rinse aid
could cause oversudsing and lead to overflow
ing. Wipe away any
spills with a damp cloth.
Dishwasher isn't level Make sure the dishwasher is level.
Error Codes
When some malfunctions happen, the appliance will indicate error codes to warn you
LED’s Codes Meanings Possible Causes
LED 1 = Intenisve
LED 2 = Normal
LED 3 = Rapid
LED 4 = 3h
LED 5 = 6h
LED1, LED2 flash
Door open The door is opened when the dishwasher
is operating
LED1, LED5 flash
Water inlet Water inlet malfunction
LED1, LED4 flash
Water drainage Water drainage malfunction
LED2, LED3 flash
Temperature sensor Temperature sensor malfunction
LED2, LED4 flash
Overflow/leakage Overflow occurs/Water leakage occurs
LED3, LED4 flash
Water leakage Water leakage occurs
WARNING:
- If overflow occurs, turn off the main water supply before calling a service.
- If there is water in the base pan because of an overfill or small leak, the water should be removed
before restarting the dishwasher.
If a problem still persists after following the steps above, please contact your distributor or a techni-
cian.
Are you interested in other Bomann products? Please visit our website:
www.bomann.de
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GSP 5703 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSP 5703 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann GSP 5703

Bomann GSP 5703 User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info