651988
6
Zoom out
Zoom in
Previous page
1/16
Next page
plied
screws on the side walls of the cabi
The provided mounting holes
(A) are visible after opening
the oven door on the left and
right frame.
Electrical connection
Electrical connectionElectrical connection
Electrical connection
WARNING:
WARNING:WARNING:
WARNING:
The installation to the mains supply must conform
to the local standards and regulations.
Improper connection may cause to an
shock
shockshock
shock!
Do not use multiple sockets or extension cord
It is not allowed to
modify the plug provided with
the appliance. If the plug does not fit properly to
the outlet, let install a proper outlet by an autho
ized specialist.
If possible, t
he accessibility of the power plug
must be ensured in order to disconnect the
ance
from the power supply in case of an eme
gency.
Ensure that your mains power corresponds with
the specifications of the appliance. The specific
tions are printed on the rating label.
Connect the mains cable to a properly installed
and earthed wall outlet.
If the plug after installation is not accessible, a
corresponding
disconnect device with a contact
separation of at least 3 mm must be available to
meet
the relevant safety regulations.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Before initial use
Before initial useBefore initial use
Before initial use
Clean the oven interior with all
therein
accessories. Follow the instructions that we give
you in the chapter "Cl
eaning and Maintenance"
6
screws on the side walls of the cabi
net.
The installation to the mains supply must conform
to the local standards and regulations.
Improper connection may cause to an
electric
electric electric
electric
Do not use multiple sockets or extension cord
s.
modify the plug provided with
the appliance. If the plug does not fit properly to
the outlet, let install a proper outlet by an autho
r-
he accessibility of the power plug
must be ensured in order to disconnect the
appli-
from the power supply in case of an eme
r-
Ensure that your mains power corresponds with
the specifications of the appliance. The specific
a-
tions are printed on the rating label.
Connect the mains cable to a properly installed
If the plug after installation is not accessible, a
disconnect device with a contact
separation of at least 3 mm must be available to
the relevant safety regulations.
therein
located
accessories. Follow the instructions that we give
eaning and Maintenance"
.
Heat the closed oven for approx. 30 minutes at
250°C in order to burn any manufacturing residue.
Use the heating function
[U
NOTE
NOTENOTE
NOTE:
: :
:
The occurring odor and possibly
development can
not be avoided.
good ventilation of the room during heating.
Operation
Operation Operation
Operation
/ Switching on and off
/ Switching on and off/ Switching on and off
/ Switching on and off
After connecting to the power supply the display
cates the factory setting
[12:00]. Adjust the current
time first
, see "Setting the time"
appliance into operation.
1
1 1
1
Oven function selector switch
Oven function selector switchOven function selector switch
Oven function selector switch
The function selector switch is
set the type of heating.
Rotate
the function selector switch until the icon for
the desired type of heat
ing points
switch may be
rotated clockwise and countercloc
wise.
2
2 2
2
Oven temperature selector switch
Oven temperature selector switchOven temperature selector switch
Oven temperature selector switch
The temperature selector switch is used
to adjust the oven
temperature.
The thermostat allows the temperature setting from
50°C to 250°C.
CAUTION:
CAUTION:CAUTION:
CAUTION:
Turn the temperature selector switch only clockwise
and back again. Otherwise the switch will be da
aged.
Manual operation
Manual operationManual operation
Manual operation
Press the button (
((
( )
) )
)
for a few seconds and the
pliance switches to the
manual operation (operation
without setting the timer functions). As long as the
symbol is lighting
, the manual mode is activated.
Heat the closed oven for approx. 30 minutes at
250°C in order to burn any manufacturing residue.
[U
pper/lower heat].
The occurring odor and possibly
a slight smoke
not be avoided.
Ensure for a
good ventilation of the room during heating.
/ Switching on and off
/ Switching on and off/ Switching on and off
/ Switching on and off
After connecting to the power supply the display
indi-
[12:00]. Adjust the current
, see "Setting the time"
, in order to put the
Oven function selector switch
Oven function selector switchOven function selector switch
Oven function selector switch
The function selector switch is
used to
set the type of heating.
the function selector switch until the icon for
ing points
upwards. The
rotated clockwise and countercloc
k-
Oven temperature selector switch
Oven temperature selector switchOven temperature selector switch
Oven temperature selector switch
The temperature selector switch is used
temperature.
The thermostat allows the temperature setting from
Turn the temperature selector switch only clockwise
and back again. Otherwise the switch will be da
m-
for a few seconds and the
ap-
manual operation (operation
without setting the timer functions). As long as the
, the manual mode is activated.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EBO 9611 IX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EBO 9611 IX in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann EBO 9611 IX

Bomann EBO 9611 IX User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info