KM / MILE SELECTION: After the wheel size input, the
following step is selection of kilometers or miles as the
measurement for distance. Press the B button to choose
between kilometer (KM) and Mile (M) press the A button to
confirm.
Clock (12H/24H): After Km/Miles selection, a digital clock is
displayed. Press the B button to switch between the 12h and
24h format. Press the A button to confirm and advance to the
clock setting mode.
Press the B button to advance the hour. When the hour
display is correct, press the A button to confirm. Press the B
button to advance the minutes. When the minute display is
correct, press the A button to confirm and advance to the
Maintenance Required Function.
1a
12
1b
1c
2a
2b
2c
I
A
I
A
E
C
A
B
D
I
F
G
H
3V CR2032
Note: Follow the numbered sequence below. Only fully tighten the cable ties when all components are aligned
Align the cadence magnet (D) on
the inside face of the left crank.
Secure using cable ties provided.
wireless computer
with cadence
owner’s manual
AB
Fit the sensor / transmitter unit (E) over the non-drive side chain
stay, with the battery compartment facing outwards. Do not fully
tighten the cable ties as you may need to adjust the position of
the unit later.
If required; adjust the spacing / position of the two sensors by
loosening the screw at the point where the sensor arms attach
to the body of the unit.
Fit the cadence magnet (D) to the inside surface
of the non-drive crank using cable ties around the crank.
Ensure that it is aligned with the arrow marked on the cadence
sensor arm on the outside of the chainstay. For best
performance the gap between the magnet and the sensor
should be less than 2mm.
Fit the spoke speed sensor magnet (C) to a
spoke, so that it is aligned with the arrow
marked on the speed sensor arm on the inside
of the chainstay. For best performance the gap
between the magnet and the sensor should be
less than 2mm.
NOTE: the clamp is offset to fit both round and
bladed spokes.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Boardman Cadence BS-18-KSS-CA-P3 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Boardman Cadence BS-18-KSS-CA-P3 in the language / languages: English as an attachment in your email.
The manual is 2,75 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.