706484

Blumfeldt Heatwave V2A - 10029834 Manual

25
Zoom out
Zoom in
Previous page
1/27
Next page
Operation
Cleaning and Care
Turning on the heater
1. Depress and turn control knob clockwise to OFF position.
2. Fully open gas valve.
3. Depress control knob and turn knob counter-clockwise to IGNITE position, then to
PILOT position (you will hear 2 clicks).
4. With the pilot light lit, keep control knob depressed for 30 seconds.
NOTE: If the pilot light has not ignited, turn heater control knob to OFF position, fully
close gas valve, wait 5 minutes, then repeat steps 2–4 of the Lighting Instructions.
NOTE: If the pilot light ignites but does not stay lit, turn heater control knob to OFF
position, fully close propane gas valve, wait 5 minutes, then repeat steps 2–3. Now,
using a lighter, ignite the pilot light through the ignition hole on the emitter screen.
Once the pilot light is lit, depress control knob for 30 seconds.
5. After depressing the control knob for 30 seconds, turn control knob to LOW. To increase
the temperature, turn towards HIGH.
Turning the heater o
1. Fully close gas valve.
2. Turn control knob clockwise to OFF
position.
O: the heater stops operation
Hi: maximum temperature position
Lo: minimum temperature position
Cleaning
• Wipe o powder coated surfaces with soft, moist rag. Do not clean heater with cleaners
that are combustible or corrosive.
• Remove debris from the burner to keep it clean and safe for use.
• Cover the burner unit with the optional protective cover when the heater is not in use.
Storage
• Always close the gas valve of the gas cylinder after use or in case of a disturbance.
• Remove the pressure regulator and the hose.
• Check the tightness of the gas valve and for damage. If you suspect a damage, have it
changed by your gas dealer.
• Never store liquid gas cylinder in a sub-terrain, or at places without adequate air
ventilation.
Pointer
Variable control knob
HIGH
LOW
PILOT
Push
to
turn
I
G
N
I
T
E
OFF
25
… 25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blumfeldt Heatwave V2A - 10029834 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blumfeldt Heatwave V2A - 10029834 in the language / languages: English, German as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info