Manual Blumfeldt 10034756 Liquidflow 800 (page 10 of 34) (English, German, French, Italian, Spanish)

776976

Zoom out

Zoom in

1/34

SAFETY INSTRUCTIONS

The appliance is designed for clean water with a temperature of max. 50°C:

any other use should be avoided.

When the maximum pump pressure is reached, the unit switches off the pump.

However, there must be a pressure difference of at least 1.4 bar between

switching on and off.

Children from the age of 8 years, people with mental, sensory or physical

impairments may only use the unit if they have been thoroughly familiarised

with the functions and safety precautions by a responsible supervisor and

understand the risks involved.

Assembly

• Make sure that the system is installed ood-proof and sufciently cooled

with dry air.

• If the pump is mounted directly in the distribution network, it must be

ensured that the inlet pressure is added to the pump pressure and that the

total pressure does not exceed 10 bar.

• The unit can be installed in an existing pipe / plant, provided that the

minimum water requirement of the pump is always covered. Observe the

installation diagrams.

Electrical connection

• Nominal current consumption of the pump must not exceed 10 (A) and the

maximum power of the motor must not exceed 1.8 kW. A disconnecting

device must be provided in the electrical installation, which allows

disconnection from the mains with at least 3 mm contact opening for

each pole. Pumps in alternating current design have an integrated motor

protection switch. Pumps in three-phase design must be installed by

the customer with an adjusted motor protection switch. We accept no

liability for the consequences of improper installation, commissioning and

improper electrical installation.

The power cable must correspond to type H08 RN-F according to DIN

VDE0620.

• This diagram facilitates a correct mains connection.

• The system is secured by a differential switch (1 fn=30 mA)

• The power cable of the pump must at least correspond to H07 RN-R

according to DIN VDE 0620 and be provided with cable lugs. The

connection of the pump must be carried out by a qualied electrician.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blumfeldt 10034756 Liquidflow 800 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blumfeldt 10034756 Liquidflow 800 Manual

Product: