4.
5.
6.
EXTERNAL MEMORY MEDIA OPERATION (USB&SD/MMC
CARD)
1. SYSTEM SETUP
1.1 TV SYSTEM
1.2 SCREEN SAVER
1.3 TV TYPE
4:3PS :
4:3LB :
16:9 :
PICTURE FLIP AND TURN
PICTURE ZOOM IN/OUT
SLIDE SHOW TRANSITION MODES
Press UP navigation on the remote button to flip the picture up
or down.
Press DOWN navigation button on the remote to flip the
picture left or right.
Press ZOOM button continuously, the picture zooms in by 2,
3, 4 times or zooms out by 1/2, 1/3, 1/4 the original size.
Press this button once more when the picture getting 1/4 size
to return to the normal play.
If the picture is enlarged, you may use the navigation buttons
to view blocked parts of the picture.
During slide show playback, press the PROGRAM button
cyclically to select one transition mode to play picture.
- it is used to select the TV mode.
Please select this option as per your TV set.
- when the player is not in used for
several minutes, a running DVD logo will move across the
TV screen to protect the TV screen.
Options:
On: Screen saver is enabled
Off: Screen saver is disabled
- it is used to select the TV scan mode, please
set as per your TV set.
Options: Normal Pan & scan mode
normal Letter box mode
16:9 wide screen mode
INITIAL SETTINGS
Initial settings page is for you to make your preferred settings
up for your player. Once the initial settings are done they are
retained in the CPU of the player until otherwise modified.
1. Press SETUP button.
2. Use the navigation buttons to select the item you want to
modify, setting page with further setting items displayed
shows on the TV screen. Again use navigation buttons to
make changes. Press ENTER button to confirm
modifications.
3. Use navigation buttons to switch to another setting on the
main setting page.
4. Press SETUP button to exit main setting page.
COMMON PROCEDURES FOR INITIAL SETTINGS
Prepare the player for External Memory media operation
1. Slide the POWER switch to ON position, Insert a USB data
traveller filled with media files into the USB port or plug the
SD/MMC card into the card slot, the USB or the SD/MMC
card is successfully detected , select a corresponding
function via navigation right/left button for play and press
ENTER Button to confirm. Folders show on the screen and
use navigation buttons to select your desired folder and
track to play..
2. Press NEXT or PREVIOUS button to skip forward or
backward.
Note: Press and hold STOP button to make selection among
USB, card and disc via navigation LEFT/RIGHT button,
confirm by pressing ENTER button.
1.4 PASSWORD - input password to unlock the system. The
steps are as follows:
1.4.1 Enter SYSTEM SETUP, select the PASSWORD item by
scrolling the down navigation button, and then press the
right navigation button to select the input box.
4
1.4.2 Input user's password "0000" to unlock it, in this case,
select the input box again to change the password by
inputting another new four numeric numbers and then press
ENTER button to confirm. When the password is changed,
you are needed to input the new one to unlock the system.
1.4.3 Once you forget your own password, use the
supervisor's password "8200" to unlock it.
: If wrong password was input in unlock status, the
system will lock.
- Set the rating of this player. If you want to
change the rating of parental lock, please input the
password to unlock first.
Options:
- Reset to factory settings.
Options: RESTORE
- It is used to select different On
Screen Display language for different user.
- select preferred audio language. (DVD
only, need disc software support)
- Select preferred subtitle language.
(DVD only, need disc software support)
- Select preferred disc menu language.
(DVD only, need disc software support)
- to set the brightness for the display.
Options: 0/2/4/6/8/10/12
- to set the contrast effect for display.
Options: 0/2/4/6/8/10/12
- to set the colour impression for display.
Options: -6/-4/-2/0/+2/+4/+6
- to set the saturation level for display.
Options: 0/2/4/6/8/10/12
Options: - Left/Right mix mode
- Select this option if you don't have a 5.1
channels amplifier.
NOTE
1.5 RATING
1KIDSAFE/2G/3PG/4PG13/5PG-R /
6R / 7 NC-17 / 8 ADULT
1.6 DEFAULT
2. LANGUAGE SETUP
2.1 OSD LANGUAGE
2.2 AUDIO LANG
2.3 SUBTITLE LANG
2.4 MENU LANG
3. VIDEO SETUP
3.1 BRIGHTNESS
3.2 CONTRAST
3.3 HUE
3.4 SATURATION
4. SPEAKER SETUP
4.1 DOWNMIX
LT/RT
STEREO
DVB OPERATIONS
GET STARTED
SEARCH A PROGRAM
Be sure the TV antenna is connected to your player
properly;
Power on the player and press FUNCTION button to switch
to DVB-T mode.
A dialogue of first time installation shows on the screen, select
YES option to perform the first time installation, then select
the options as mentioned in the dialogue to finish the first time
installation, select NO option to exit this interface.
Press NAVIGATION UP/DOWN button to change the channel
number. A desired channel can be reached using these two
keys.
Once the desired channel is selected, it will start broadcasting
the selected channel immediately.
During DVB play mode, press TV/RADIO button on the
remote to switch to RADIO play mode (Need signal source
support).
Press TTX button to display teletext information (Need signal
source support).
SWITCHING BETWEEN TV/RADIO
TELETEXT
