676381

Bluesound Pulse Sub Manual

7
Zoom out
Zoom in
Previous page
1/8
Next page
TROUBLESHOOTING
Symptom Action
No sound
7
Ensure the main power switch is on. This switch is located at the back of
the subwoofer.
Ensure the power cord is connected to the subwoofer and plugged into a
live AC outlet.
The PULSE SUB utilizes signal sensing auto on/off circuitry. If no signal
is sent to the subwoofer, it will not power up. When using the subwoofer
output of a receiver or processor, no signal may be immediately present in
this output. The subwoofer will only power up when bass signal appears at
the subwoofer input.
If the wireless connection or low level cable is poor or has been severed,
the subwoofer may not make a sound.
Change the Power Mode switch to Off, then to ON. (Return to AUTO after
the test if you wish to return to standby).
Lower volume if the subwoofer begins to sound distorted to determine if
playback at a lower level solves the problem. If a slight reduction in level
solves the problem, then the subwoofer level was too high. If the distorted
sound remains at a low level, driver(s) may be damaged.
Hum that appears when using the PULSE SUB’s low level input(s) is
usually caused by using an inferior, damaged, exceptionally long low
level cable or cables routed near high current wiring/appliances. Replace/
shorten the low level cable connecting the subwoofer to the source
equipment (receiver or processor). Low level cable runs of longer than 20
feet may require the use of a line driver (not available from Bluesound).
See your dealer if you require service. Authorized Bluesound dealers are equipped to handle almost all
problems. You may locate your nearest Bluesound authorized dealer online at www.bluesound.com. If the
problem is not resolved, please contact us, providing the model name, serial number, date of purchase, dealer
name, and a full description of the problem.
Hum
Sounds distorted
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bluesound Pulse Sub at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bluesound Pulse Sub in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bluesound Pulse Sub

Bluesound Pulse Sub Quick start guide - English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info