581565

Blomberg TKF 8431 G Manual

6
Zoom out
Zoom in
Previous page
1/44
Next page
6
EN
• Connection must comply with national regulations.
• If the current value of the fuse or breaker in the
house is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
• Power cable plug must be within easy reach after
installation.
• The voltage and allowed fuse or breaker protection
are specified in the “Technical Specifications”
section.
• The specified voltage must be equal to your mains
voltage.
• Do not make connections via extension cables or
multi-plugs.
• The main fuse and switches must have a contact
distance of minimum 3 mm.
B Damaged power cable must only be replaced by a
qualified electrician.
B If the product is faulty, it must not be operated unless
it is repaired! There is the risk of electric shock!
First use
• To have the product ready for operation before
calling the authorised service agent, make sure
that its location and power supply installations are
appropriate. If they are not, call a qualified electrician
to have any necessary arrangements carried out.
• Make sure that the power connections of the product
are in accordance with the instructions given in
relevant chapters of this manual.
Disposing of packaging material
Packaging materials are dangerous to children. Keep
packaging materials in a safe place out of reach of
children. Packaging materials of your product are
manufactured from recyclable materials. Sort and
dispose of them in accordance with recycled waste
instructions. Do not dispose of them with normal
domestic waste.
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and chimney
connections.
3. Drain water remained in the machine completely
before transportation.
Disposing of the old machine
Dispose of your old machine in an environmentally
friendly manner.
Refer to your local dealer or solid waste collection centre
in your area to learn how to dispose of your machine.
Before disposing of your old machine, cut off the power
cable plug and make the loading door lock unusable to
avoid dangerous conditions to children.
1. Remove the hose on the machine by pulling it out from
its end. Do not use any tools to take out the hose.
2. Connect the special drain hose supplied with the
machine to the pipe fitting.
3. The other end of the drain hose can be directly
connected to the wastewater drain or to the
washbasin. The fitting must always be secured in all
types of connections. Your house may be flooded if the
hose gets out of its housing during water discharge.
Important:
• The hose should be attached to a height of maximum
80 cm.
• You must be careful not the pinch or bend the hose.
• The end of the hose should not be bent, it should not
be stepped on and it must not be folded between the
drain and the machine.
Adjusting the feet
In order to ensure that your machine operates more silently
and vibration-free, it must stand level and balanced on its
feet. Balance the machine by adjusting the feet.
Rotate the feet to adjust until the machine stands level and
firmly.
C Never unscrew the adjustable feet from their housings.
Electrical connection
Connect the machine to a grounded outlet protected
by a fuse of suitable capacity as stated in the technical
specifications table. Our company shall not be liable for
any damages that will arise when the machine is used on a
circuit without grounding.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 8431 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8431 G in the language / languages: English, German as an attachment in your email.

The manual is 5,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info