581564
31
Zoom out
Zoom in
Previous page
1/36
Next page
31
EN
active, deactivate it before performing these
operations.
Adding/removing laundry in standby mode
In order to add or remove laundry after the
programme starts:
1. Press the “Start/Pause/Cancel” button to
switch the dryer to “Pause” mode. Drying
process will stop.
2. Open the door at “Pause” position and close it
again after adding or taking out laundry.
3. Press “Start/Pause/Cancel” button to start the
programme.
C Any laundry added after the drying process
has started may cause the dried clothes in
the machine intermingle with wet clothes and
the result will be wet laundry after the drying
process is over.
C Laundry may be added or taken out as much
as desired during a drying process, but this
process will extend the programme duration
and increase energy consumption since
the drying will be interrupted continuously.
Therefore, it is recommended to add laundry
before the drying programme has started.
Child-proof lock
There is a child-proof lock to prevent any
programme interruption due to the pressing of
button while the programme is running. The
loading door and all buttons except the “On/Off”
button on the control panel are deactivated when
the child-proof lock is active.
Press the “Start/Pause/Cancel” and “Cancel
audio warning” buttons simultaneously for 3
seconds to activate the child-press lock.
To start a new programme after the programme
is over or to interrupt the programme, the child-
proof lock should be deactivated. Press the same
buttons for 3 sec. again to deactivate the child-
proof lock.
C Child-proof lock is deactivated when the
machine is restarted by pressing the On/Off
button.
C Press the relevant buttons for 3 seconds to
activate the child-proof lock. A long beep
will be heard and the child-proof lock will
be activated. A double beep will be heard if
you press any button or turn the programme
selection knob while the child-proof lock is
active. Press the buttons for 3 seconds to
deactivate the child-proof lock. Single beep
will be heard and child-proof lock will be
deactivated.
A A double beep will be heard if you turn
the programme selection knob when the
machine is running and the child-proof lock
is active. If you deactivate the child-proof
lock without returning the program selection
knob to its previous position, the programme
will be terminated since the position of the
programme selection knob is changed. The
drying light turns on and the machine remains
on hold until a new programme is selected
and the “Start/Pause/Cancel” button is
pressed.
Finishing by canceling the programme
To cancel any selected programme:
Press “Start/Pause/Cancel” button for about 3
seconds. The “Filter cleaning”, “Water tank” and
“End/ Anti-creasing” warning lights will turn on at
the end of this period for reminding purposes.
A As the inside of the dryer will be excessively
hot when you cancel the programme while
the dryer is running, activate the ventilation
programme to cool it down.
End of programme
The “End/Anti-creasing”, “Filter cleaning” and
“Water tank” warning lights on the programme
follow up indicator will turn on when the
programme comes to an end. The door can be
opened and the machine becomes ready for a
second cycle.
Press “On/Off” button to turn off the dryer.
C Final step of the drying cycle (cooling step) is
performed without heat application in order to
keep the items at a temperature that would
not harm them.
C A 2-hour anti creasing programme to prevent
laundry from creasing will be activated if
you do not take the laundry out after the
programme has come to an end.
C If you will not take the laundry out immediately,
do not stop the dryer before the drying
process is complete.
C Clean the filter after each drying (please see,
Filter cleaning).
C Drain the water tank after each drying (please
see, Water tank)
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg TKF 8239 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg TKF 8239 in the language / languages: English, German as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info