302202
43
Zoom out
Zoom in
Previous page
1/44
Next page
20 - EN
7 Solution suggestions for problems
Problem Cause Explanation / Suggestion
Drying process
takes too much
time.
Cover filter and filter drawer
might have not been cleaned.
* Clean the cover filter and Filter drawer.
Laundry come
out wet at the
end of drying.
* Cover filter and filter drawer
might have not been cleaned.
* Excessive laundry might have
been loaded in.
* Clean the cover filter and Filter drawer.
* Do not overload the machine.
Machine does
not switch on
or the program
does not start.
Machine is not
activated when
set.
* It might have not been
plugged in.
* The loading door may be ajar.
* Program might have not been
set or the "Start/Pause/Cancel"
button might have not been
pressed.
* "Childproof lock" might have
been activated.
* Make sure that the machine is plugged in.
* Make sure that the loading door is properly
closed.
* Make sure that the program has been set and it
is not in “Stop” mode.
* Deactivate the childproof lock.
Program has
been interrupted
without any
cause.
* The loading door may be ajar.
* Electricity may be cut off.
* Make sure that the loading door is properly
closed.
* Press the "Start/Pause/Cancel" button to start
the program.
Laundry has
shrunk, become
felted or
deteriorated.
* A program suitable for the
laundry type might have not
been used.
* Dry only the laundry which is suitable for drying
in your machine after checking the labels on your
clothes.
* Select a program with suitable temperature for
the laundry type to dry your clothes.
Drum lightning
does not come
on.
(for models
equipped with a
lamp)
* The machine might have not
beenstartedbyusingtheOn/
Offbutton.
* Bulb may have blown.
*MakesurethatthemachineisOn.
* Call the authorized service to replace the bulb.
“Final / Anti-
creasing” light
flashes.
* The 2-hour anti creasing
program to prevent laundry
from creasing might have been
activated.
* Turn off the machine and take out the laundry.
“Final / Anti-
creasing” light
is on.
* Program has come to an end. * Turn off the machine and take out the laundry.
The “Drying” light
flashes.
* A heat sensor failure has
occurred. Machine ends the
program without heating.
* Turn off the machine and take out the laundry.
Call your authorized service.
Also, for products equipped with a “Condenser” and a “Heat pump”
“Tank full”
warning light is
on.
* Water may be full.
* Anti-creasing program might
be running.
* Drain the water in the water tank.
“Filter cleaning”
light is on.
* Filter might have not been
cleaned.
* Clean the cover filter.
“Condenser
cleaning” light
is on.
* Filter drawer/Condenser might
have not been cleaned.
* Clean the filters in the condenser/filter drawer
under the kick plate.
A Call an authorized service if the problem persists.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg tkf 7350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg tkf 7350 in the language / languages: English, German as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blomberg tkf 7350

Blomberg tkf 7350 User Manual - German - 24 pages

Blomberg tkf 7350 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info